1. Boost pressure sensor installation
1) Install the boost pressure sensor to the intake air duct.
Tightening torque: 2.5 N・m { 0.25 kgf・m / 22 lb・in }
2) Connect the connector to the boost pressure sensor.
2. Engine cover installation
1) Install the engine cover to the engine.
Legend
- Engine cover
3. Preliminary and post procedures
1. Post procedures
1) Connect the battery cable to the battery negative terminal.
2) Referring to the following, perform the setting of the front door power window switch with AUTO UP/AUTO DOWN function.
Refer to "9.Body, Cab, Accessories 9T.Glass, Windows, Mirrors front door power window switch setting".
3) Close the engine hood.