ON-BOARD DIAGNOSTIC SYSTEM PID/DATA MONITOR FUNCTION

id030200108400

•  The parameter identification (PID)/data monitor function is used for optionally selecting input/output signal monitor items preset in the 4-wheel drive (4WD) control module (CM) and reading them out in real-time.

PID/DATA Monitor Table

PID/data monitor item

Input/output part

Unit/Condition

(Tester display)
WARN_LAMP
4WD CM
—
AAT
Ambient air temperature
°C, °F
APP
Accelerator pedal position
%
CAL_TABLE
4WD CM
—
CUP_SOL
4WD CM
%
GEAR
PCM
1st/2nd/3rd/4th/5th/6th/7th/Park/Neutral/Drive/Reverse
OIL_TEMP
Ignition voltage
°C, °F
RPM
PCM
RPM
SHIFT
TCM
P/R/N/D/S/L
VPWR
Ignition voltage
V
WSPD_LF
ABS wheel-speed sensor (LF)
KPH, MPH
WSPD_LR
ABS wheel-speed sensor (LR)
WSPD_RF
ABS wheel-speed sensor (RF)
WSPD_RR
ABS wheel-speed sensor (RR)
TORQUE
4WD CM
Nm