DTC U3000:66 [LASER SENSOR]


id0402c4895400

DTC
U3000:66
Laser sensor malfunction
DETECTION CONDITION
•  Laser sensor detects a large number of consecutive drive cycles with the smart city brake support (SCBS) system malfunction.
FAIL-SAFE FUNCTION
•  Inhibits the smart city brake support (SCBS) controls.
•  Illuminates the master warning light
•  The message ”SCBS Inspection Required” is indicated in the display.
POSSIBLE CAUSE
•  Laser sensor malfunction
•  Instrument cluster malfunction
SYSTEM WIRING DIAGRAM

Diagnostic procedure

STEP

INSPECTION

ACTION

1
INSPECT FOR INSTRUMENT CLUSTER MALFUNCTION
•  Switch the ignition to off.
•  Using the M-MDS, perform the DTC inspection for the DSC HU/CM.
•  Are any other DTCs detected?
Yes
Go to the applicable DTC inspection.
No
Go to the next step.
2
VERIFY THAT NO OTHER DTCS ARE PRESENT
•  Are any other DTCs output?
Yes
Go to the applicable DTC inspection.
No
Go to the next step.
3
VERIFY THAT THE SAME DTC IS NOT PRESENT
•  Clear the DTCs from the memory.
•  Are the same DTCs present?
Yes
Repeat the inspection from Step 1.
If the malfunction recurs, replace the laser sensor.
No
DTC troubleshooting completed.