Note
• When removing the resistor, perform the procedure in the posture shown in the figure.
ac5wzw00001899
|
RESISTOR REMOVAL/INSTALLATION [MANUAL AIR CONDITIONER]
id0740a2800700
ac5wzw00001899
|
1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5].)(See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5 (WITHOUT i-stop)].)(See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 2.2].)
2. Remove the dashboard under cover. (See DASHBOARD UNDER COVER REMOVAL/INSTALLATION.)
3. Disconnect the connector.
ac5wzw00001900
|
4. Rotate the resistor (2) while pressing the tab (1).
ac5wzw00001901
|
5. Remove the resistor.
ac5wzw00001902
|
6. Install in the reverse order of removal.
