DTC U3000:55

id080200002200

System malfunction location

•  Configuration error (SAS control module internal malfunction)

Detection condition

Warning

•  Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure.

•  SAS control module falsely recognizes that the SAS control module has inflators with no settings due to a SAS control module internal malfunction

Fail-safe

—

Possible cause

•  SAS control module malfunction

System wiring diagram

—

System malfunction location	• Configuration error (SAS control module internal malfunction)
Detection condition	Warning • Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure. • SAS control module falsely recognizes that the SAS control module has inflators with no settings due to a SAS control module internal malfunction
Fail-safe	—
Possible cause	• SAS control module malfunction
System wiring diagram	—

Diagnostic Procedure

ACTION

• Replace the SAS control module. (See SAS CONTROL MODULE REMOVAL/INSTALLATION.)