SECURITY INDICATOR LIGHT: 09, DTC: U3000:96/P1260:00 [IMMOBILIZER SYSTEM]
id0902e4028200
|
System malfunction location |
Start stop unit malfunction |
|---|---|
|
Detection condition
|
• Start stop unit malfunction detected.
|
|
Fail-safe
|
—
|
|
Possible cause
|
• Start stop unit malfunction
|
|
System wiring diagram
|
—
|
Diagnostic Procedure
|
Step |
Inspection |
Action |
|
|---|---|---|---|
|
1
|
PERFORM DTC INSPECTION AND VERIFY IF MALFUNCTIONING PART IS START STOP UNIT
• Clear DTC for the immobilizer system using the M-MDS.
• Perform the DTC inspection for the immobilizer system using the M-MDS.
• Security indicator light: 09, DTC U3000:96/P1260:00 displayed?
|
Yes
|
Replace the start stop unit, then go to the next step.
|
|
No
|
Go to the next step.
|
||
|
2
|
VERIFY IF OTHER DTCs DISPLAYED
• Are any other DTCs displayed?
|
Yes
|
Repair the malfunctioning part according to the applicable DTC troubleshooting.
|
|
No
|
DTC troubleshooting completed.
|
||