DTC U0423:68 [BLIND SPOT MONITORING (BSM)]
id0902i3018400
System malfunction location |
Error signal received from instrument cluster |
---|---|
Detection condition
|
• The BSM control module received an error signal from the instrument cluster.
|
Fail-safe
|
• BSM is stopped.
|
Possible cause
|
• DTCs are stored in the instrument cluster.
• Instrument cluster malfunction
• BSM control module malfunction
|
System wiring diagram
|
—
|
Diagnostic Procedure
Step |
Inspection |
Action |
|
---|---|---|---|
1
|
VERIFY INSTRUMENT CLUSTER DTCs
• Perform the DTC inspection for the instrument cluster using the M-MDS.
• Is the DTC displayed?
|
Yes
|
Repair the malfunctioning part according to the applicable DTC troubleshooting.
|
No
|
Go to the next step.
|
||
2
|
PERFORM DTC INSPECTION AND VERIFY IF MALFUNCTIONING PART IS INSTRUMENT CLUSTER
• Clear BSM control module DTCs using the M-MDS.
• Perform the DTC inspection for the BSM control module using the M-MDS.
• Is the DTC U0423:68 displayed?
|
Yes
|
Replace the instrument cluster, then go to the next step.
|
No
|
Go to Step 4.
|
||
3
|
VERIFY THAT REPAIRS HAVE BEEN COMPLETED
• Clear BSM control module DTCs using the M-MDS.
• Perform the DTC inspection for the BSM control module using the M-MDS.
• Is the DTC U0423:68 displayed?
|
Yes
|
Repeat the inspection from Step 1.
• If the malfunction recurs, replace the BSM control module, then go to the next step.
|
No
|
Go to the next step.
|
||
4
|
VERIFY IF OTHER DTCs DISPLAYED
• Are any other DTCs displayed?
|
Yes
|
Repair the malfunctioning part according to the applicable DTC troubleshooting.
|
No
|
DTC troubleshooting completed.
|