DTC B1087:88 [FRONT BODY CONTROL MODULE (FBCM)]


id0902p2006700

System malfunction location

LIN communication error

Detection condition
•  LIN bus communication line malfunction detected for 1 s or more
Fail-safe
Possible cause
•  Malfunction in LIN bus communication line
•  Front body control module (FBCM) malfunction
System wiring diagram

Diagnostic Procedure

Step

Inspection

Action

1
VERIFY FRONT BODY CONTROL MODULE (FBCM) DTCs AGAIN
•  Clear front body control module (FBCM) DTCs using the M-MDS.
•  Switch the ignition ON (engine off or on) and wait for 1 s or more.
•  Perform the front body control module (FBCM) DTC inspection using the M-MDS.
•  Is DTC B1087:88 displayed?
Yes
A malfunction in LIN bus communication line can be considered.
•  Repair or replace the wiring harness between the DC-DC converter and front body control module (FBCM), then go to the next step.
•  Repair or replace the wiring harness between the current sensor and front body control module (FBCM), then go to the next step.
No
Go to Step 3.
2
VERIFY THAT REPAIRS HAVE BEEN COMPLETED
•  Clear front body control module (FBCM) DTCs using the M-MDS.
•  Switch the ignition ON (engine off or on) and wait for 1 s or more.
•  Perform the front body control module (FBCM) DTC inspection using the M-MDS.
•  Is DTC B1087:88 displayed?
Yes
Replace the front body control module (FBCM), then go to the next step.
No
Go to the next step.
3
VERIFY IF OTHER DTCs DISPLAYED
•  Are any other DTCs displayed?
Yes
Repair the malfunctioning part according to the applicable DTC troubleshooting.
No
DTC troubleshooting completed.