DTC U3000:49 [FRONT BODY CONTROL MODULE (FBCM)]

id0902p2011400

System malfunction location

Front body control module (FBCM) internal malfunction

Detection condition

• Malfunction inside front body control module (FBCM) detected.

Fail-safe

—

Possible cause

• Front body control module (FBCM) malfunction

System wiring diagram

—

System malfunction location	Front body control module (FBCM) internal malfunction
Detection condition	• Malfunction inside front body control module (FBCM) detected.
Fail-safe	—
Possible cause	• Front body control module (FBCM) malfunction
System wiring diagram	—

Diagnostic Procedure

Step	Inspection		Action
1	PERFORM DTC INSPECTION AND VERIFY IF MALFUNCTIONING PART IS FRONT BODY CONTROL MODULE (FBCM) • Clear front body control module (FBCM) DTCs using the M-MDS. (See CLEARING DTC [FRONT BODY CONTROL MODULE (FBCM)].) • Perform the front body control module (FBCM) DTC inspection using the M-MDS. (See DTC INSPECTION [FRONT BODY CONTROL MODULE (FBCM)].) • Is DTC U3000:49 displayed?	Yes	replace the front body control module (FBCM), then go to the next step. (See FRONT BODY CONTROL MODULE (FBCM) REMOVAL/INSTALLATION.)
1		No	Go to the next step.
2	VERIFY IF OTHER DTCs DISPLAYED • Are any other DTCs displayed?	Yes	Repair the malfunctioning part according to the applicable DTC troubleshooting. (See DTC TABLE [FRONT BODY CONTROL MODULE (FBCM)].)
2		No	DTC troubleshooting completed.