DTC B1026:96 [START STOP UNIT]

id0902p6019200

System malfunction location

Steering lock malfunction

Detection condition

• Start stop unit detects malfunction in the steering lock of the internal start stop unit.

Fail-safe

—

Possible cause

• Start stop unit malfunction

System wiring diagram

—

System malfunction location	Steering lock malfunction
Detection condition	• Start stop unit detects malfunction in the steering lock of the internal start stop unit.
Fail-safe	—
Possible cause	• Start stop unit malfunction
System wiring diagram	—

Diagnostic Procedure

Step	Inspection		Action
1	PERFORM DTC INSPECTION AND VERIFY IF MALFUNCTIONING PART IS START STOP UNIT • Clear DTC for the start stop unit using the M-MDS. (See CLEARING DTC [START STOP UNIT].) • Perform the DTC inspection for the start stop unit using the M-MDS. (See DTC INSPECTION [START STOP UNIT].) • Is DTC B1026:96 displayed?	Yes	Replace the start stop unit, then go to the next step. (See START STOP UNIT REMOVAL/INSTALLATION.)
1		No	Go to the next step.
2	VERIFY IF OTHER DTCs DISPLAYED • Are any other DTCs displayed?	Yes	Repair the malfunctioning part according to the applicable DTC troubleshooting. (See DTC TABLE [START STOP UNIT].)
2		No	DTC troubleshooting completed.