DTC U0073:00, U0100:00 [DOSING CONTROL UNIT (SKYACTIV-D 2.2)]
id0102k1913400
DTC U0073:00 |
CAN system communication error (HS CAN) |
---|---|
DETECTION CONDITION
|
• Malfunction in CAN bus communication line.
MONITORING CONDITIONS
• Battery voltage: 10.9—16 V
• Ignition switched ON (engine off or on)
Diagnostic support note
• This is a continuous monitor (other).
• The check engine light does not illuminate.
• FREEZE FRAME DATA is not available.
• Snapshot data is available.
• DTC is stored in the dosing control unit memory.
|
FAIL-SAFE FUNCTION
|
• Restricts the maximum remaining distance to empty.
• Limits the upper limit of the engine speed.
|
POSSIBLE CAUSE
|
• CAN bus communication line malfunction
• Dosing control unit malfunction
|
SYSTEM WIRING DIAGRAM
|
• Not applicable
|
DTC U0100:00 |
CAN communication: communication error to PCM |
---|---|
DETECTION CONDITION
|
• Communication error between the dosing control unit and PCM continues for 5 s or more.
MONITORING CONDITIONS
• Battery voltage: 10.9—16 V
• Ignition switched ON (engine off or on)
Diagnostic support note
• This is a continuous monitor (CCM).
• The check engine light illuminates if the dosing control unit detects the above malfunction condition during the first drive cycle.
• FREEZE FRAME DATA/Snapshot data is available.
• DTC is stored in the dosing control unit memory.
|
FAIL-SAFE FUNCTION
|
• Restricts the maximum remaining distance to empty.
• Limits the upper limit of the engine speed.
|
POSSIBLE CAUSE
|
• CAN communication line malfunction between PCM and dosing control unit
• PCM malfunction
• Dosing control unit malfunction
|
SYSTEM WIRING DIAGRAM
|
• Not applicable
|
Diagnostic Procedure