COOLING FAN MOTOR INSPECTION [SKYACTIV-G 2.5T]

id0112q5801800

Note

•  The cooling fan motor cannot be removed as a single unit. If the cooling fan motor is replaced, replace the cooling fan component.

DTC Inspection

1.  Connect the M-MDS to the DLC-2.

2.  Perform the DTC inspection using the M-MDS. (See ON-BOARD DIAGNOSTIC TEST [PCM (SKYACTIV-G 2.5T)].)

•  If any DTC related to the cooling fan motor is present, repair the malfunctioning location according to the applicable DTC troubleshooting. (See DTC TABLE [PCM (SKYACTIV-G 2.5T)].)