EXHAUST GAS PRESSURE SENSOR REMOVAL/INSTALLATION [SKYACTIV-G 2.5T]

id0140h0443600

Replacement Part

O-ring
 
Quantity: 1
 
Location of use: Exhaust gas pressure sensor

Warning
•  A hot engine and exhaust system can cause severe burns. Turn off the engine and wait until they are cool before removing the exhaust system.

1.  Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION.)

2.  Remove the plug hole plate. (See PLUG HOLE PLATE REMOVAL/INSTALLATION [SKYACTIV-G 2.5T].)

3.  Disconnect the exhaust gas pressure sensor connector.

4.  Remove the exhaust gas pressure sensor.

ac9uuw00006003

5.  Install in the reverse order of removal.