SUSPENSION TECHNICAL DATA

id025000800100

Front wheel alignment (Unloaded)*1

Item

Fuel gauge indication

Empty

1/4

1/2

3/4

Full
Maximum steering angle
[Tolerance ±3°]
Inner
37°54′
Outer
30°54′
Total toe-in
Tire
[Tolerance ±4 {0.2}]
(mm {in})
2.0 {0.08}
Rim inner
[Tolerance ±3 {0.1}]
Vehicle equipped with 17 inch wheel: 1.2 {0.047}
Vehicle equipped with 19 inch wheel: 1.3 {0.051}
(degree)
0°10′±0°20′
Caster angle*2 (Reference value)
[Tolerance ±1°]
SKYACTIV-G 2.0
SKYACTIV-G 2.5
SKYACTIV-G 2.5T
5°52′
5°54′
5°55′
5°56′
5°57′
SKYACTIV-D 2.2
5°51′
5°53′
5°54′
5°56′
5°57′
Camber angle*2 (Reference value)
[Tolerance ±1°]
-0°25′
-0°25′
-0°26′
-0°26′
-0°26′
Steering axis inclination (Reference value)
11°56′
11°57′
11°57′
11°58′
11°58′

*1  :Engine coolant and engine oil are at specified level. Spare tire, jack and tools are in designated position.
*2  :Difference between left and right must not exceed 1°30′.

Rear wheel alignment (Unloaded)*1

Item

Fuel gauge indication

Empty

1/4

1/2

3/4

Full
Total toe-in
Tire
[Tolerance ±4 {0.2}]
(mm {in})
2.0 {0.08}
Rim inner
[Tolerance ±3 {0.1}]
Vehicle equipped with 17 inch wheel: 1.2 {0.047}
Vehicle equipped with 19 inch wheel: 1.3 {0.051}
(degree)
0°10′±0°20′
Camber angle*2 (Reference value)
[Tolerance ±1°]
SKYACTIV-G 2.0
SKYACTIV-G 2.5
SKYACTIV-G 2.5T
-0°37′
-0°39′
-0°41′
-0°43′
-0°44′
SKYACTIV-D 2.2
-0°36′
-0°38′
-0°40′
-0°42′
-0°44′
Thrust angle (Reference value) [Tolerance ±0°48′]
-0°00′

*1  :Engine coolant and engine oil are at specified level. Spare tire, jack and tools are in designated position.
*2  :Difference between left and right must not exceed 1°30′.

Suspension

Item

Specification
Front lower arm ball joint stud starting torque
17 N·m {1.7 kgf·m, 12 ft·lbf} max.
Front lower arm ball joint stud rotational torque
3.2 N·m {33 kgf·cm, 28 in·lbf} max.
Front stabilizer control link ball joint starting torque
0.8—3.5 N·m {8.2—35 kgf·cm, 7.1—30 in·lbf}
Rear stabilizer control link ball joint starting torque
0.8—3.5 N·m {8.2—35 kgf·cm, 7.1—30 in·lbf}

Standard tire and wheel

Item

Specification
Wheel
Size
17 × 7J
19 × 7J
Material
Steel
Aluminum alloy
Inset
(mm {in})
50 {2.0}
45 {1.8}
Pitch circle diameter
(mm {in})
114.3 {4.50}
Tire
Size
225/65R17 102H
225/65R17 102V
225/65R17 102V
225/65R17 102H
225/55R19 99V
Air pressure
(kPa {bar <psi>})
Front
Up to 3 persons
230 {2.3, <33>}
230 {2.3, <33>}*1:
240 {2.4, <35>}*1:
250 {2.5, <36>}
Full load
260 {2.6, <38>}
Rear
Up to 3 persons
230 {2.3, <33>}
230 {2.3, <33>}*1:
240 {2.4, <35>}*1:
250 {2.5, <36>}
Full load
280 {2.8, <41>}
290 {2.9, <42>}
Remaining tread
(mm {in})
1.6 {0.063} min.
Wheel and tire
Wheel and tire runout
(mm {in})
Lateral direction
2.5 {0.098} max.
2.0 {0.079} max.
Radial direction
1.5 {0.059} max.
Wheel imbalance
Inside
(g {oz})
Knock-type*2:
8 {0.3} max.
Adhesive-type*2:
13 {0.46} max.
Adhesive-type*2:
12 {0.42} max.
Outside
(g {oz})
Knock-type*3:
8 {0.3} max.
Knock-type*3:
7 {0.2} max.
Lug nut tightening torque
(N·m {kgf·m, ft·lbf})
108—147 {12—14, 80—108}

*1  :Verify that the tire pressures are correct by checking the label attached to the door frame which is visible when the driverÅfs door is opened.
*2  :Do not install four or more weights. Do not affix the weights such that they are parallel to each other or overlapping. The total weight of all the weights is 160 g {5.64 oz} or less.
*3  :Do not install three or more weights. One weight is 60 g {2.1 oz} or less and two weights are 100 g {3.53 oz} or less.

Temporary spare tire and wheel

Item

Specification
Wheel
Size
17 × 5 1/2J
Inset
(mm {in})
45 {1.8}
Pitch circle diameter
(mm {in})
114.3 {4.50}
Material
Steel
Tire
Size
185/80R17 99M
Air pressure
(kPa {bar <psi>})
320 {3.2, <46>}
Remaining tread
(mm {in})
1.6 {0.063} min.
Wheel and tire
Lug nut tightening torque
(N·m {kgf·m, ft·lbf})
108—147 {12—14, 80—108}