DTC P187B:00 [ELECTRONIC 4WD CONTROL SYSTEM]
id0302a6200300
DTC P187B:00
|
A tire diameter is outside of the allowable range
|
||
DETECTION CONDITION
|
• 4WD control module detects a tire diameter is outside of the allowable range
|
||
FAIL-SAFE FUNCTION
|
• 4WD protection condition (4WD control paused)
• 4WD warning light: Illuminated
|
||
POSSIBLE CAUSE
|
• Detects a tire diameter which is outside of the allowable range to switch to 2WD and protect the system.
• Flat tire
• Wrong tire pressure
|
||
SYSTEM WIRING DIAGRAM
|
Not applicable
|
Diagnostic procedure
STEP |
INSPECTION |
ACTION |
|
---|---|---|---|
1
|
INSPECT A TIRE DIAMETER
• Is the tire diameter as specified?
|
Yes
|
Go to the next step.
|
No
|
Replace with specified tire.
|
||
2
|
VERIFY THAT THE SAME DTC IS NOT PRESENT
• Clear the DTCs from the memory.
• Drive the vehicle in a straight line at 10 km/h {6.2 mph} or more for 10 s or more.
• Using the M-MDS, perform the 4WD control module DTC inspection.
• Is the same DTC present?
|
Yes
|
Replace the 4WD control module.
|
No
|
Go to the next step.
|
||
3
|
VERIFY THAT NO OTHER DTCS ARE PRESENT
• Are any other DTCs output?
|
Yes
|
Go to the applicable DTC inspection.
|
No
|
DTC troubleshooting completed.
|