TRANSMISSION/TRANSAXLE TECHNICAL DATA

id055000800100

Clutch [C66M-R, C66MX-R]

Item

Specification

Engine type

SKYACTIV-G 2.0 (Without cylinder deactivation)

SKYACTIV-G 2.0 (With cylinder deactivation)

Clutch fluid

SAE J1703 or FMVSS116 DOT-3 or DOT-4

Clutch pedal height (Reference value)

130.5 mm {5.138 in}

Clutch pedal free play (Reference value)

10 mm {0.39 in} or less

Clutch pedal full stroke (Reference value)

162.6 mm {6.402 in}

Distance A, from clutch disengagement point to floor covering (Reference value)

57.3 mm {2.26 in}

Clutch cover diaphragm spring fingers maximum depth

0.6 mm {0.02 in}

Maximum clearance of flatness of the pressure plate

0.3 mm {0.01 in}

—

Clutch cover diaphragm spring fingers maximum height difference

1.0 mm {0.039 in}

0.8 mm {0.03 in}

Minimum clutch disc thickness

0.3 mm {0.01 in}

—

Maximum clutch disc runout

0.7 mm {0.03 in}

—

Clutch disc facing thickness on clutch cover side

—

New part: 3.6 mm {0.14 in}

Maximum: 2.1 mm {0.083 in}

Flywheel maximum runout

0.1 mm {0.004 in}

—

Dual-mass flywheel guide pin projection maximum amount

—

11.0—12.0 mm {0.434—0.472 in}

Dual-mass flywheel oscillation allowance

—

1.5 mm {0.059 in}

Item	Specification
Clutch fluid	SAE J1703 or FMVSS116 DOT-3 or DOT-4
Clutch pedal height (Reference value)	130.5 mm {5.138 in}
Clutch pedal free play (Reference value)	10 mm {0.39 in} or less
Clutch pedal full stroke (Reference value)	162.6 mm {6.402 in}
Distance A, from clutch disengagement point to floor covering (Reference value)	57.3 mm {2.26 in}
Clutch cover diaphragm spring fingers maximum depth	0.6 mm {0.02 in}
Maximum clearance of flatness of the pressure plate	0.3 mm {0.01 in}	—
Clutch cover diaphragm spring fingers maximum height difference	1.0 mm {0.039 in}	0.8 mm {0.03 in}
Minimum clutch disc thickness	0.3 mm {0.01 in}	—
Maximum clutch disc runout	0.7 mm {0.03 in}	—
Clutch disc facing thickness on clutch cover side	—	New part: 3.6 mm {0.14 in} Maximum: 2.1 mm {0.083 in}
Flywheel maximum runout	0.1 mm {0.004 in}	—
Dual-mass flywheel guide pin projection maximum amount	—	11.0—12.0 mm {0.434—0.472 in}
Dual-mass flywheel oscillation allowance	—	1.5 mm {0.059 in}

Clutch [D66M-R, D66MX-R]

Item

Specification

Engine type

SKYACTIV-D 2.2 (Fuel injector (2pin type))

SKYACTIV-D 2.2 (Fuel injector (6pin type))

Clutch fluid

SAE J1703 or FMVSS116 DOT-3 or DOT-4

Clutch pedal height (Reference value)

130.5 mm {5.138 in}

Clutch pedal free play (Reference value)

10 mm {0.39 in} or less

Clutch pedal full stroke (Reference value)

162.6 mm {6.402 in}

Distance A, from clutch disengagement point to floor covering (Reference value)

48.7 mm {1.92 in}

Clutch cover diaphragm spring fingers maximum depth

0.6 mm {0.02 in}

Clutch cover diaphragm spring fingers maximum height difference

0.8 mm {0.03 in}

Clutch disc facing thickness on clutch cover side

New part (2WD): 3.6 mm {0.14 in}

New part (4WD): 3.7 mm {0.15 in}

Maximum: 2.5 mm {0.098 in}

New part: 3.6 mm {0.14 in}

Maximum: 2.1 mm {0.083 in}

Dual-mass flywheel guide pin projection maximum amount

11.0—12.0 mm {0.434—0.472 in}

Dual-mass flywheel oscillation allowance

1.5 mm {0.059 in}

Item	Specification
Clutch fluid	SAE J1703 or FMVSS116 DOT-3 or DOT-4
Clutch pedal height (Reference value)	130.5 mm {5.138 in}
Clutch pedal free play (Reference value)	10 mm {0.39 in} or less
Clutch pedal full stroke (Reference value)	162.6 mm {6.402 in}
Distance A, from clutch disengagement point to floor covering (Reference value)	48.7 mm {1.92 in}
Clutch cover diaphragm spring fingers maximum depth	0.6 mm {0.02 in}
Clutch cover diaphragm spring fingers maximum height difference	0.8 mm {0.03 in}
Clutch disc facing thickness on clutch cover side	New part (2WD): 3.6 mm {0.14 in} New part (4WD): 3.7 mm {0.15 in} Maximum: 2.5 mm {0.098 in}	New part: 3.6 mm {0.14 in} Maximum: 2.1 mm {0.083 in}
Dual-mass flywheel guide pin projection maximum amount	11.0—12.0 mm {0.434—0.472 in}
Dual-mass flywheel oscillation allowance	1.5 mm {0.059 in}

Manual Transaxle [C66M-R, C66MX-R]

European (L.H.D. U.K.) specs.

Item			Specification
Manual transaxle oil	Type	VIN serial No. 600001—810000	API service GL-4 (SAE 75W-80)
	Type	VIN serial No. 100001—600000, 810001—	MAZDA LONG LIFE GEAR OIL G7^*1
	Capacity (approx. quantity)		2WD: 1.65 L {1.74 US qt, 1.45 lmp qt} 4WD: 1.70 L {1.80 US qt, 1.50 lmp qt}

*1 :Mazda Long Life Gear Oil G7 is superior oil for low fuel cost and optimum shift-feel. Using Mazda Long Life Gear Oil G7 is recommended. If Mazda Long Life Gear Oil G7 cannot be obtained, use standard oil (API Service GL-4 (SAE 75W-80)).

Except european (L.H.D. U.K.) specs.

Item			Specification
Manual transaxle oil	Type	VVIN serial No. 100001—300000	API service GL-4 (SAE 75W-80)
	Type	VIN serial No. 300001—	MAZDA LONG LIFE GEAR OIL G7^*1
	Capacity (approx. quantity)		2WD: 1.65 L {1.74 US qt, 1.45 lmp qt} 4WD: 1.70 L {1.80 US qt, 1.50 lmp qt}

Manual Transaxle [D66M-R, D66MX-R]

VIN serial No. 600001—810000

Item		Specification
Manual transaxle oil	Grade	API service GL-4
	Viscosity	SAE 75W-80
	Capacity (approx. quantity)	2.40 L {2.54 US qt, 2.11 lmp qt}

Except VIN serial No. 600001—810000

Item		Specification
Manual transaxle oil	Specified manual transaxle oil	MAZDA LONG LIFE GEAR OIL G7^*1
Manual transaxle oil	Capacity (approx. quantity)	2.40 L {2.54 US qt, 2.11 lmp qt}

Automatic Transaxle [FW6A-EL, FW6AX-EL]

Item

Specification

ATF

Type

ATF FZ

Capacity (approx. quantity)

SKYACTIV-G 2.0, SKYACTIV-G 2.5 (Without cylinder deactivation): 7.8 L {8.2 US qt, 6.9 lmp qt}

SKYACTIV-G 2.5 (With cylinder deactivation): 8.0 L {8.5 US qt, 7.0 Imp qt}

Added amount if ATF is drained from drain plug (approx. quantity)

3.3 L {3.5 US qt, 2.9 Imp qt}

Item	Specification
ATF	Type	ATF FZ
Capacity (approx. quantity)	SKYACTIV-G 2.0, SKYACTIV-G 2.5 (Without cylinder deactivation): 7.8 L {8.2 US qt, 6.9 lmp qt} SKYACTIV-G 2.5 (With cylinder deactivation): 8.0 L {8.5 US qt, 7.0 Imp qt}
Added amount if ATF is drained from drain plug (approx. quantity)	3.3 L {3.5 US qt, 2.9 Imp qt}

Line pressure

Measurement conditions		Specification (kPa {kgf/cm², psi})
Idling	R position	500—700 {5.10—7.13, 72.6—101.0}
Idling	D and M (1GR) position	330—470 {3.37—4.79, 47.9—68.1}
Stalling	R position	1,790—2,100 {18.26—21.41, 259.7—304.5}
Stalling	D and M (1GR) position	970—1,170 {9.90—11.93, 141.0—169.6}

Stall speed (SKYACTIV-G 2.0)

Measurement conditions	Standard value (rpm)
R position	1,700—2,200
D position	1,900—2,600
M position	1,900—2,600

Stall speed (SKYACTIV-G 2.5)

Measurement conditions	Standard value (rpm)
R position	1,700—2,200
D position	2,200—2,900
M position	2,200—2,900

Time lag

Measurement conditions	Specification (s)
N to D selected	0.4—0.7
N to R selected	0.4—0.7

Automatic Transaxle [GW6A-EL, GW6AX-EL]

Item

Specification

ATF

Type

ATF FZ

Capacity (approx. quantity)

8.0 L {8.5 US qt, 7.0 lmp qt}

Added amount if ATF is drained from drain plug (approx. quantity)

3.5—4.9 L {3.7—5.1 US qt, 3.1—4.3 lmp qt}

Item	Specification
ATF	Type	ATF FZ
Capacity (approx. quantity)	8.0 L {8.5 US qt, 7.0 lmp qt}
Added amount if ATF is drained from drain plug (approx. quantity)	3.5—4.9 L {3.7—5.1 US qt, 3.1—4.3 lmp qt}

Line pressure

Measurement conditions		Specification (kPa {kgf/cm², psi})
Idling	R position	500—700 {5.10—7.13, 72.6—101.0}
Idling	D and M (1GR) position	330—470 {3.37—4.79, 47.9—68.1}
Stalling	R position	1,790—2,100 {18.26—21.41, 259.7—304.5}
Stalling	D and M (1GR) position	970—1,170 {9.90—11.93, 141.0—169.6}

Stall speed

Measurement conditions	Standard value (rpm)
R position	1,800—2,400
D position	2,200—3,100
M position	2,200—3,100

Time lag

Measurement conditions	Specification (s)
N to D selected	0.4—0.7
N to R selected	0.4—0.7

Item	Specification
Engine type	SKYACTIV-G 2.0 (Without cylinder deactivation)	SKYACTIV-G 2.0 (With cylinder deactivation)
Clutch fluid	SAE J1703 or FMVSS116 DOT-3 or DOT-4
Clutch pedal height (Reference value)	130.5 mm {5.138 in}
Clutch pedal free play (Reference value)	10 mm {0.39 in} or less
Clutch pedal full stroke (Reference value)	162.6 mm {6.402 in}
Distance A, from clutch disengagement point to floor covering (Reference value)	57.3 mm {2.26 in}
Clutch cover diaphragm spring fingers maximum depth	0.6 mm {0.02 in}
Maximum clearance of flatness of the pressure plate	0.3 mm {0.01 in}	—
Clutch cover diaphragm spring fingers maximum height difference	1.0 mm {0.039 in}	0.8 mm {0.03 in}
Minimum clutch disc thickness	0.3 mm {0.01 in}	—
Maximum clutch disc runout	0.7 mm {0.03 in}	—
Clutch disc facing thickness on clutch cover side	—	New part: 3.6 mm {0.14 in} Maximum: 2.1 mm {0.083 in}
Flywheel maximum runout	0.1 mm {0.004 in}	—
Dual-mass flywheel guide pin projection maximum amount	—	11.0—12.0 mm {0.434—0.472 in}
Dual-mass flywheel oscillation allowance	—	1.5 mm {0.059 in}

Item	Specification
Engine type	SKYACTIV-D 2.2 (Fuel injector (2pin type))	SKYACTIV-D 2.2 (Fuel injector (6pin type))
Clutch fluid	SAE J1703 or FMVSS116 DOT-3 or DOT-4
Clutch pedal height (Reference value)	130.5 mm {5.138 in}
Clutch pedal free play (Reference value)	10 mm {0.39 in} or less
Clutch pedal full stroke (Reference value)	162.6 mm {6.402 in}
Distance A, from clutch disengagement point to floor covering (Reference value)	48.7 mm {1.92 in}
Clutch cover diaphragm spring fingers maximum depth	0.6 mm {0.02 in}
Clutch cover diaphragm spring fingers maximum height difference	0.8 mm {0.03 in}
Clutch disc facing thickness on clutch cover side	New part (2WD): 3.6 mm {0.14 in} New part (4WD): 3.7 mm {0.15 in} Maximum: 2.5 mm {0.098 in}	New part: 3.6 mm {0.14 in} Maximum: 2.1 mm {0.083 in}
Dual-mass flywheel guide pin projection maximum amount	11.0—12.0 mm {0.434—0.472 in}
Dual-mass flywheel oscillation allowance	1.5 mm {0.059 in}