PID/DATA MONITOR TABLE [CLIMATE CONTROL UNIT (MANUAL AIR CONDITIONER)]

id0702k3801900

PID

Unit/Condition

Data contents

Climate control unit terminal

A/C_SW

Off/On

•  Off: A/C switch is off.

•  On: A/C switch is on.

—

AUTO_SW

Note

•  Displays in the M-MDS but it does not operate.

B_MT_RLY_CS

Off/On

•  Off: Blower relay is off.

•  On: Blower relay is on.

—

DEF_SW

Note

•  Displays in the M-MDS but it does not operate.

DUAL_SW

Note

•  Displays in the M-MDS but it does not operate.

ENG_C_TMP

°C, °F

Engine coolant temperature is displayed.

—

EVA_TMP_SEN

°C, °F

Evaporator temperature is displayed.

M

FAN_DWN_SW

Note

•  Displays in the M-MDS but it does not operate.

FAN_UP_SW

Note

•  Displays in the M-MDS but it does not operate.

F_REC_CS

Off/On

•  Off: Forced recirculate control is off.

•  On: Forced recirculate control is on.

—

F_WIND_TEMP^*1

°C, °F

Windshield temperature is displayed.

—

FRE_SW

Note

•  Displays in the M-MDS but it does not operate.

FUEL_TYPE

—

Fuel type is displayed.

—

HC_TMP_SEN

°C, °F

Heater core temperature is displayed.

—

HUMIDITY_SEN^*1

%

Relative humidity is displayed.

—

M_DOWN_SW

Note

•  Displays in the M-MDS but it does not operate.

M_UP_SW

Note

•  Displays in the M-MDS but it does not operate.

OFF_SW

Note

•  Displays in the M-MDS but it does not operate.

ON/OFF_SW

Note

•  Displays in the M-MDS but it does not operate.

OUT_CAR_TMP

°C, °F

Ambient temperature is displayed.

—

R/DEF_CS

Off (enable)/

Off (suspend)/

Off (inhibit)/

On

•  Off (enable): Rear window defogger is off (operation enabled).

•  Off (suspend): Rear window defogger is off (operation interrupted / indicator is kept On).

•  Off (inhibit): Rear window defogger is off (operation disabled / indicator is turned Off).

•  On: Rear window defogger is on.

—

R/DEF_SW

Off/On

•  Off: Rear window defogger switch is off.

•  On: Rear window defogger switch is on.

—

REC_SW

Off/On

•  Off: RECIRCULATE switch is off.

•  On: RECIRCULATE switch is on.

—

RLS_TEMP^*1

°C, °F

Humidity sensor temperature is displayed.

—

S_HT_CUT_CS

Note

•  Displays in the M-MDS but it does not operate.

ST_HT_SW_D

Note

•  Displays in the M-MDS but it does not operate.

ST_HT_SW_P

Note

•  Displays in the M-MDS but it does not operate.

STOP_ST

Available/

Not Available/

Error

•  Available: i-stop permit request signal is sent.

•  Not Available: i-stop inhibit request is sent.

•  Error: i-stop signal error is sent.

—

SV_ST_D

Note

•  Displays in the M-MDS but it does not operate.

SV_ST_P

Note

•  Displays in the M-MDS but it does not operate.

SV_SW_D

Note

•  Displays in the M-MDS but it does not operate.

SV_SW_P

Note

•  Displays in the M-MDS but it does not operate.

SYNC_SW

Note

•  Displays in the M-MDS but it does not operate.

UNIT_TMP

Note

•  Displays in the M-MDS but it does not operate.

PID	Unit/Condition	Data contents	Climate control unit terminal
A/C_SW	Off/On	• Off: A/C switch is off. • On: A/C switch is on.	—
AUTO_SW	Note • Displays in the M-MDS but it does not operate.
B_MT_RLY_CS	Off/On	• Off: Blower relay is off. • On: Blower relay is on.	—
DEF_SW	Note • Displays in the M-MDS but it does not operate.
DUAL_SW	Note • Displays in the M-MDS but it does not operate.
ENG_C_TMP	°C, °F	Engine coolant temperature is displayed.	—
EVA_TMP_SEN	°C, °F	Evaporator temperature is displayed.	M
FAN_DWN_SW	Note • Displays in the M-MDS but it does not operate.
FAN_UP_SW	Note • Displays in the M-MDS but it does not operate.
F_REC_CS	Off/On	• Off: Forced recirculate control is off. • On: Forced recirculate control is on.	—
F_WIND_TEMP^*1	°C, °F	Windshield temperature is displayed.	—
FRE_SW	Note • Displays in the M-MDS but it does not operate.
FUEL_TYPE	—	Fuel type is displayed.	—
HC_TMP_SEN	°C, °F	Heater core temperature is displayed.	—
HUMIDITY_SEN^*1	%	Relative humidity is displayed.	—
M_DOWN_SW	Note • Displays in the M-MDS but it does not operate.
M_UP_SW	Note • Displays in the M-MDS but it does not operate.
OFF_SW	Note • Displays in the M-MDS but it does not operate.
ON/OFF_SW	Note • Displays in the M-MDS but it does not operate.
OUT_CAR_TMP	°C, °F	Ambient temperature is displayed.	—
R/DEF_CS	Off (enable)/ Off (suspend)/ Off (inhibit)/ On	• Off (enable): Rear window defogger is off (operation enabled). • Off (suspend): Rear window defogger is off (operation interrupted / indicator is kept On). • Off (inhibit): Rear window defogger is off (operation disabled / indicator is turned Off). • On: Rear window defogger is on.	—
R/DEF_SW	Off/On	• Off: Rear window defogger switch is off. • On: Rear window defogger switch is on.	—
REC_SW	Off/On	• Off: RECIRCULATE switch is off. • On: RECIRCULATE switch is on.	—
RLS_TEMP^*1	°C, °F	Humidity sensor temperature is displayed.	—
S_HT_CUT_CS	Note • Displays in the M-MDS but it does not operate.
ST_HT_SW_D	Note • Displays in the M-MDS but it does not operate.
ST_HT_SW_P	Note • Displays in the M-MDS but it does not operate.
STOP_ST	Available/ Not Available/ Error	• Available: i-stop permit request signal is sent. • Not Available: i-stop inhibit request is sent. • Error: i-stop signal error is sent.	—
SV_ST_D	Note • Displays in the M-MDS but it does not operate.
SV_ST_P	Note • Displays in the M-MDS but it does not operate.
SV_SW_D	Note • Displays in the M-MDS but it does not operate.
SV_SW_P	Note • Displays in the M-MDS but it does not operate.
SYNC_SW	Note • Displays in the M-MDS but it does not operate.
UNIT_TMP	Note • Displays in the M-MDS but it does not operate.

*1 :With humidity sensor