DTC B00A0:81/B00A0:87 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)]


id0802g8833600

System malfunction location

•  B00A0:81:Occupant classification sensor memory check sum error
•  B00A0:87:Signal reception error from occupant classification sensor
Detection condition
Warning
•  Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure.
•  Error signal is detected between SAS control module and occupant classification sensor
•  The SAS control module could not receive CAN signal from the occupant classification sensor for 1 s or more.
Fail-safe
Not applicable
Possible cause
•  Malfunction in CAN line between the SAS control module and occupant classification sensor
System wiring diagram
Not applicable


Diagnostic Procedure

•  Perform the malfunction diagnosis according to the troubleshooting procedure for the multiplex communication system. (See FOREWORD [SKYACTIV-G 2.0/2.5, SKYACTIV-D 2.2 (MTX) (L.H.D.)].) (See FOREWORD [SKYACTIV-G 2.0/2.5, SKYACTIV-D 2.2 (MTX) (R.H.D.)].) (See FOREWORD [SKYACTIV-G 2.5T, SKYACTIV-D 2.2 (ATX) (L.H.D.)].) (See FOREWORD [SKYACTIV-G 2.5T, SKYACTIV-D 2.2 (ATX) (R.H.D.)].)