LUMBAR SUPPORT MOTOR INSPECTION

id091300804300

Warning
•  Handling a side air bag improperly can accidentally operate (deploy) the air bag, which may seriously injure you. Read the service warnings/cautions in the Workshop Manual before handling the front seat (side air bag integrated). (See AIR BAG SYSTEM SERVICE WARNINGS [STANDARD DEPLOYMENT CONTROL SYSTEM].) (See AIR BAG SYSTEM SERVICE CAUTIONS [STANDARD DEPLOYMENT CONTROL SYSTEM].) (See AIR BAG SYSTEM SERVICE WARNINGS [TWO-STEP DEPLOYMENT CONTROL SYSTEM].) (See AIR BAG SYSTEM SERVICE CAUTIONS [TWO-STEP DEPLOYMENT CONTROL SYSTEM].)

1.  Disconnect the negative battery terminal and wait for 1 min or more. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION.)

2.  Slide hooks A in the order of arrows (1), (2), (3) shown in the figure and disconnect them from hooks B.

ac5uuw00002049

3.  Open fasteners.

am6zzw00012365

4.  Disconnect the lumber support motor connector.

5.  Apply battery positive voltage to the lumber support motor terminals and inspect the front seat operation.

•  If not as specified, replace the front seat back frame. (See FRONT SEAT BACK FRAME REMOVAL/INSTALLATION.)

L.H.D. without memory power seat / R.H.D. with memory power seat

ac5wzw00010205

L.H.D. with memory power seat / R.H.D. without memory power seat

ac5wzw00011243