SECURITY AND LOCKS PERSONALIZATION

id091400111100

•  A personalization feature has been adopted which switches each function between operation/non-operation.
•  The settings of the following functions, and warning and guidance functions for the system can be turned ON/OFF optionally.
•  The Mazda Modular Diagnostic System (M-MDS) is required to perform the setting. Refer to the [SECURITY AND LOCKS PERSONALIZATION FEATURES SETTING PROCEDURE] in the workshop manual for the detailed setting procedure.

Advanced keyless entry system


Using Mazda Modular Diagnostic System (M-MDS)

Mazda Modular Diagnostic System (M-MDS) display

Function

Initial setting

Setting contents

Control unit
Advanced keyless function.*1
The advanced keyless entry system and push button start system functions can be disabled.
Enabled.
Enabled. / Disabled.
Start stop unit

*1  :Because the push button start system function has been disabled, to start the engine press the upper part of the remote transmitter against the center of the push button start.


Using center display

Display of center display

Function

Initial setting

Setting contents

Control unit
Keyless Lock Beep Volume
The keyless beeper volume can be adjusted.
Off or Medium*1
Off / Low / Medium / High
Start stop unit
Auto Door Relock Time
The operation start time of the auto re-lock function can be changed.
30 seconds
30 seconds / 60 seconds / 90 seconds
Start stop unit
Walk Away Lock
The out-of-area (reception area) type auto lock function can be set.
Off
Off / On
Start stop unit
Reset
Returns the setting content of the door lock system to the initial setting.
NO
YES / NO
•  Rear body control module (RBCM)
•  Start stop unit

*1  :The initial value differs depending on the market.


Keyless entry system


Using Mazda Modular Diagnostic System (M-MDS)

Mazda Modular Diagnostic System (M-MDS) display

Function

Initial setting

Setting contents

Control unit
Advanced keyless function.*1
The keyless entry system and push button start system functions can be disabled.
Enabled.
Enabled. / Disabled.
Start stop unit

*1  :Because the push button start system function has been disabled, to start the engine press the upper part of the remote transmitter against the center of the push button start.


Using center display

Display of center display

Function

Initial setting

Setting contents

Control unit
Auto Door Relock Time
The operation start time of the auto re-lock function can be changed.
30 seconds
30 seconds / 60 seconds / 90 seconds
Start stop unit
Reset
Returns the setting content of the door lock system to the initial setting.
NO
YES / NO
•  Rear body control module (RBCM)
•  Start stop unit


Power door lock system


Using center display

Display of center display

Function

Initial setting

Setting contents

Control unit
Auto Door Lock Mode
Auto door lock function can be changed.
Lock: When Driving, Unlock: IGN Off
Off / Lock: When Driving / Lock: When Driving, Unlock: IGN Off / Lock: Shifting from Park / Lock: Shifting from Park, Unlock: In Park
Rear body control module (RBCM)
Reset
Returns the setting content of the door lock system to the initial setting.
NO
YES / NO
•  Rear body control module (RBCM)
•  Start stop unit


Power Saving Function (With Remote Transmitter Type B)

Function

Initial setting

Setting contents
The power saving function can be set.
OFF
OFF / ON