FLOOR SIDE PANEL INSTALLATION [PANEL REPLACEMENT]

id098008618800

Symbol Mark

ac5uub00000124

Install Procedure

1.  Drill holes for the plug welding before installing the new parts.

2.  When installing new parts, measure and adjust the body as necessary to conform with standard dimensions.

3.  After temporarily installing new parts, make sure the related parts fit properly.

4.  Plug weld the 4 locations indicated by (A) from the rear end panel side shown in the figure.

5.  Spot weld the 6 locations indicated by (B) from rear wheel housing side shown in the figure then install the floor side panel No.2.

ac5uub00000125

6.  Plug weld the 42 locations indicated by (C) shown in the figure then install the floor side panel No.1.

ac5wzb00000525