SHROUD SIDE MEMBER INSTALLATION [PANEL REPLACEMENT]

id098008919100

Symbol Mark

ac5uub00000110

Installation Procedure

1.  Drill holes for the plug welding before installing the new parts.

2.  When installing new parts, measure and adjust the body as necessary to conform with standard dimensions.

3.  After temporarily installing new parts, make sure the related parts fit properly.

4.  Plug weld the 9 locations indicated by (A) shown in the figure.

5.  Plug weld the 3 locations indicated by (B) shown in the figure, then install the shroud side member.

ac5uub00000111