COWL SIDE REINFORCEMENT (FRONT) COMPONENT INSTALLATION [PANEL REPLACEMENT]

id098008950100

Symbol Mark

ac5uub00000228

Installation Procedure

1.  Drill holes for the plug welding before installing the new parts.

2.  When installing new parts, measure and adjust the body as necessary to conform with standard dimensions.

3.  After temporarily installing new parts, make sure the related parts fit properly.

4.  Spot weld the 21 locations indicated by (A) shown in the figure.

5.  Plug weld the 11 locations indicated by (B) shown in the figure.

6.  Plug weld the 9 locations indicated by (C) shown in the figure, then install the cowl side reinforcement (front) component.

ac5uub00000331