DTC U0010:88/U0100:00/U0131:00/U0140:00/U0155:00/U0159:00/U0214:00/U0232:00 [360°VIEW MONITOR CONTROL MODULE]

id1502c7055200

Description	•  U0010:88 ―  Module communication error (MS-CAN) •  U0100:00 ―  Communication error with PCM •  U0131:00 ―  Communication error with electric power steering (EPS) control module •  U0140:00 ―  Communication error with front body control module (FBCM) •  U0155:00 ―  Communication error with instrument cluster •  U0159:00 ―  Communication error with parking assist unit •  U0214:00 ―  Communication error with start stop unit •  U0232:00 ―  Communication error with blind spot monitoring (BSM) control module (LH)
Detection condition	•  U0010:88 ―  The 360°view monitor control module detects a CAN bus communication line (MS-CAN) malfunction. •  U0100:00 ―  The 360°view monitor control module cannot receive CAN signal from the PCM. •  U0131:00 ―  The 360°view monitor control module cannot receive CAN signal from the electric power steering (EPS) control module. •  U0140:00 ―  The 360°view monitor control module cannot receive CAN signal from the front body control module (FBCM). •  U0155:00 ―  The 360°view monitor control module cannot receive CAN signal from the instrument cluster. •  U0159:00 ―  The 360°view monitor control module cannot receive CAN signal from the parking assist unit. •  U0214:00 ―  The 360°view monitor control module cannot receive CAN signal from the start stop unit. •  U0232:00 ―  The 360°view monitor control module cannot receive CAN signal from the blind spot monitoring (BSM) control module (LH).
Fail-safe	•  U0010:88 ―  Not applicable •  U0100:00 ―  The 360°view monitor system displays for only 8 s on the center display when the 360°view monitor switch is pressed, and then it switches to non-display •  U0131:00 ―  Projected vehicle path is not displayed when system is starting •  U0140:00 ―  Not applicable •  U0155:00 ―  Selector lever or shift lever position information received directly before detecting a malfunction is maintained. •  U0159:00 ―  Parking sensor status icon is displayed •  U0214:00 ―  Not applicable •  U0232:00 ―  Rear Cross Traffic Alert (RCTA) status icon is displayed
Possible cause	•  Malfunction in CAN bus communication line •  Malfunction in CAN line between PCM and 360°view monitor control module •  Malfunction in CAN line between electric power steering (EPS) control module and 360°view monitor control module •  Malfunction in CAN line between front body control module (FBCM) and 360°view monitor control module •  Malfunction in CAN line between instrument cluster and 360°view monitor control module •  Malfunction in CAN line between parking assist unit and 360°view monitor control module •  Malfunction in CAN line between start stop unit and 360°view monitor control module •  Malfunction in CAN line between blind spot monitoring (BSM) control module (LH) and 360°view monitor control module
System wiring diagram	Not applicable

Diagnostic Procedure