360°VIEW MONITOR CONTROL MODULE

id151100004400


Purpose

•  The 360° view monitor control module controls the front camera, side cameras (LH, RH), and the rear mount camera based on the input signals from each unit and the 360° view monitor switch.

Function


Camera display function

•  The 360° view monitor control module calculates the top view image based on the video signals from each camera, and sends a video signal to the connectivity master unit (CMU).


Top view / Front view, Front wide view, Side view off timer function

•  If a maximum of 270 s have elapsed since the display of the top view/front view, front wide view, and side view screen began, the 360° view monitor control module sends a video display cancel signal to the connectivity master unit (CMU).


Structural

•  The 360° view monitor control module is located under the floor covering on the front passenger side.
ac5wzn00004756

Input/output signal table

Terminal

Signal name
A
Power supply
B
—
C
ACC relay control
D
—
E
Retract/return signal
F
—
G
—
H
GND
I
Monitor signal
J
—
K
Monitor GND
L
Shield ground
M
Side camera(RH) power supply
N
Side camera(RH) GND
O
Side camera(RH) signal
P
Side camera(RH) GND
Q
Front camera power supply
R
Front camera GND
S
Front camera signal
T
Front camera GND
U
Rear mount camera power supply
V
Rear mount camera GND
W
Rear mount camera signal
X
Rear mount camera GND
Y
Side camera(LH) power supply
Z
Side camera(LH) GND
AA
Side camera(LH) signal
AB
Side camera(LH) GND
AC
—
AD
—
AE
MS-CAN_H
AF
MS-CAN_L


Operation

•  For the 360° view monitor control module operation, refer to the [360° VIEW MONITOR SYSTEM].(See 360°VIEW MONITOR SYSTEM.)

Fail-safe

•  Not applicable