DTC U0001:88/U0100:00/U0101:00/U0104:00/U0114:00/U0131:00/U0151:00/U0155:00/U0235:00 [DYNAMIC STABILITY CONTROL (DSC)]

id0402b2893300

DTC	U0001:88, U0100:00, U0101:00, U0104:00, U0114:00, U0131:00, U0151:00, U0155:00, U0235:00		CAN line
DETECTION CONDITION		•  U0001:88 ―  Open or short circuit in CAN system wiring harness is detected. •  U0100:00 ―  Communication error with PCM is detected in CAN communication. •  U0101:00 ―  Communication error with TCM is detected in CAN communication. •  U0104:00 ―  Communication error with vehicle control module (V/C-module) is detected in CAN communication. •  U0114:00 ―  Communication error with 4WD control module is detected in CAN communication. •  U0131:00 ―  Communication error with EPS CM is detected in CAN communication. •  U0151:00 ―  Communication error with SAS control module is detected in CAN communication. •  U0155:00 ―  Communication error with instrument cluster is detected in CAN communication. •  U0235:00 ―  Communication error with laser sensor is detected in CAN communication.
FAIL-SAFE FUNCTION		Refer to “DTC Table” and “Fail-safe Function Malfunction Contents”. (See ON-BOARD DIAGNOSIS [DYNAMIC STABILITY CONTROL (DSC)].)
POSSIBLE CAUSE		•  CAN system wiring harness open or short circuit •  CAN system wiring harness open or short circuit with PCM •  CAN system wiring harness open or short circuit with TCM •  CAN system wiring harness open or short circuit with vehicle control module (V/C-module) •  CAN system wiring harness open or short circuit with 4WD control module •  CAN system wiring harness open or short circuit with EPS CM •  CAN system wiring harness open or short circuit with SAS control module •  CAN system wiring harness open or short circuit with instrument cluster •  CAN system wiring harness open or short circuit with laser sensor •  instrument cluster malfunction
SYSTEM WIRING DIAGRAM		—

Diagnostic procedure