SUNROOF SYSTEM INITIALIZATION PROCEDURE

id091500858000

• If the following operations have been performed, initial setting is reset, and except tilt up operation are disabled. Therefore, performing initial setting is necessary.

― Negative battery cable is disconnected. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5 (WITHOUT i-stop)].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 2.2].)

― Sunroof system power supply fuse is removed.

1. Switch the ignition ON (engine off or on).

2. Press the tilt up switch to fully tilt up the glass panel for approx. 1 s or more.