LIGHTING SYSTEM PERSONALIZATION

id091800013300

Caution
•  The personalization feature may not be set correctly if [Not Adopted.] or [Not equipped] is selected in the setting displayed on the Mazda Modular Diagnostic System (M-MDS). Do not select [Not Adopted.] or [Not equipped] in the setting displayed on the Mazda Modular Diagnostic System (M-MDS).
Note
•  Settings of some personalization features displayed on the Mazda Modular Diagnostic System (M-MDS) cannot be changed depending on the vehicle specification.
•  A personalization feature has been adopted with which settings for each function can be changed.
•  The setting for each function can be switched using the Mazda Modular Diagnostic System (M-MDS) or the center display (with center display). Refer to the [LIGHTING SYSTEM PERSONALIZATION FEATURES SETTING PROCEDURE] in the workshop manual for the detailed setting procedure.

Auto Light System

Mazda Modular Diagnostic System (M-MDS)

Mazda Modular Diagnostic System (M-MDS) display

Function

Initial setting

Setting contents

Control module
Auto-headlight On.
Auto light sensitivity can be changed.
Medium
Dark / Medium Dark / Medium / Medium Light / Light
Rear body control module (RBCM)

Center display

Display of center display

Function

Initial setting

Setting contents

Control module
Auto Headlight On
Auto light sensitivity can be changed.
Medium
Light / Medium Light / Medium / Medium Dark / Dark
Rear body control module (RBCM)
Reset
Returns the setting content of the lighting system to the initial setting.
No
No / Yes
•  Front body control module (FBCM)
•  Rear body control module (RBCM)
•  Forward sensing camera (FSC)
•  Instrument cluster
•  Adaptive LED headlights control module
•  Adaptive front lighting system (AFS) control module

Note
•  If the mode is set to [Light] and [Medium Light], the illuminance level for turning on the headlight LO, TNS, and panel light increases. Therefore, each light turns on when the ambient light is brighter than when the level is set to [Medium]. In addition, if the mode is set to [Dark] or [Medium Dark], the illuminance level for turning on the headlight LO, TNS, and panel light decreases. Therefore, each light turns on when the ambient light is darker than when the level is set to [Medium].
•  The auto light sensitivity setting turns on/off the headlight LO, TNS, and panel light according to the following illumination levels.
Note
•  The following illumination levels are a reference. The illumination levels vary depending on the surrounding conditions (weather, reflection off buildings).

Setting contents

Lights on operation

Lights off operation

Panel light On

Panel light On

Panel light On

Panel light Off

TNS Off

TNS On

TNS Off

TNS Off

Headlight LO Off

Headlight LO On

Headlight LO Off

Headlight LO Off
Light
1,000 lux
4,000 lux
8,000 lux
2,000 lux
Medium Light
850 lux
3,000 lux
6,000 lux
1,700 lux
Medium
700 lux
2,000 lux
4,000 lux
1,400 lux
Medium Dark
550 lux
1,000 lux
2,000 lux
1,100 lux
Dark
400 lux
500 lux
1,000 lux
800 lux


Turn light system

Mazda Modular Diagnostic System (M-MDS)

Mazda Modular Diagnostic System (M-MDS) display

Function

Initial setting

Setting contents

Control module
Three-Flash Turn Signal
The operation of the three-flash turn signal function can be disabled.
ON (Australian, European (L.H.D. U.K.), Israel specs.)/OFF (Except Australian, European (L.H.D. U.K.), Israel specs.)
OFF / ON
Rear body control module (RBCM)

Center display

Display of center display

Function

Initial setting

Setting contents

Control module
3-Flash Turn Signal
The turn light system can be switched between operable and inoperable.
On (Australian, European (L.H.D. U.K.), Israel specs.) / Off (Except Australian, European (L.H.D. U.K.), Israel specs.)
On / Off
Rear body control module (RBCM)
Reset
Returns the setting content of the turn light system to the initial setting.
No
No / Yes
Rear body control module (RBCM)


Coming Home Light System

Mazda Modular Diagnostic System (M-MDS)

Mazda Modular Diagnostic System (M-MDS) display

Function

Initial setting

Setting contents

Control module
Coming Home Light operation time
The coming home light system operation time can be switched.
30 seconds.
0 seconds. / 30 seconds. / 60 seconds. / 90 seconds. / 120 seconds.
Rear body control module (RBCM)

Center display

Display of center display

Function

Initial setting

Setting contents

Control module
Coming Home Lights Timer
The coming home light system operation time can be switched.
30 seconds
Off / 30 seconds / 60 seconds / 90 seconds / 120 seconds
Rear body control module (RBCM)
Reset
Returns the setting content of the lighting system to the initial setting.
No
No / Yes
•  Front body control module (FBCM)
•  Rear body control module (RBCM)
•  Forward sensing camera (FSC)
•  Instrument cluster
•  Adaptive LED headlights control module
•  Adaptive front lighting system (AFS) control module


Leaving Home Light System

Mazda Modular Diagnostic System (M-MDS)

Mazda Modular Diagnostic System (M-MDS) display

Function

Initial setting

Setting contents

Control module
Leaving Home Light system
The leaving home light system can be switched between operable and inoperable.
Off (except European (L.H.D. U.K.) specs.)/
On (European (L.H.D. U.K.) specs.)
Off / On
Rear body control module (RBCM)

Center display

Display of center display

Function

Initial setting

Setting contents

Control module
Leaving Home Lights
The leaving home light system can be switched between operable and inoperable.
Off (except European (L.H.D. U.K.) specs.)/
On (European (L.H.D. U.K.) specs.)
On / Off
Rear body control module (RBCM)
Reset
Returns the setting content of the lighting system to the initial setting.
No
No / Yes
•  Front body control module (FBCM)
•  Rear body control module (RBCM)
•  Forward sensing camera (FSC)
•  Instrument cluster
•  Adaptive LED headlights control module
•  Adaptive front lighting system (AFS) control module

Dimmer switch is operated

Function

Initial setting

Setting contents

Control module
The leaving home light system can be switched between operable and inoperable.
Inoperable (except European (L.H.D. U.K.) specs.)/
Operable (European (L.H.D. U.K.) specs.)
Operable/Inoperable
BCM


Room Light Control System

Mazda Modular Diagnostic System (M-MDS)

Mazda Modular Diagnostic System (M-MDS) display

Function

Initial setting

Setting contents

Control module
Interior Light Timeout - Door Open.
•  The map light illumination time after a door is opened can be changed.
•  The cargo compartment light illumination time after the liftgate is opened can be changed.
30 minutes.
30 minutes. / 60 minutes. / 10 minutes.
Rear body control module (RBCM)
Interior Light Timeout - Door Closed.
The map light illumination time after all doors are closed can be changed.
15 seconds.
15 seconds. / 7.5 seconds. / 30 seconds. / 60 seconds.
Rear body control module (RBCM)

Center display

Display of center display

Function

Initial setting

Setting contents

Control module
Interior Light Timeout - Doors Open
•  The front/rear map light illumination time after any door is opened can be changed.
•  The cargo compartment light illumination time after the liftgate is opened can be changed.
30 minutes
60 minutes / 30 minutes / 10 minutes
Rear body control module (RBCM)
Interior Light Timeout - Doors Closed
The front/rear map light illumination time after all the doors are closed can be changed.
15 seconds
60 seconds / 30 seconds / 15 seconds / 7.5 seconds
Rear body control module (RBCM)
Reset
Returns the setting content of the lighting system to the initial setting.
No
No / Yes
•  Front body control module (FBCM)
•  Rear body control module (RBCM)
•  Forward sensing camera (FSC)
•  Instrument cluster
•  Adaptive LED headlights control module
•  Adaptive front lighting system (AFS) control module


Running Light System (Australian specs.)

Using light switch

Function

Initial setting

Setting contents

Control module
The running light system function can be set.
On (Running light illumination)
Off (Running light non-illumination)/On (Running light illumination)
Front body control module (FBCM)

Center display

Display of center display

Function

Initial setting

Setting contents

Control module
Daytime Running Lights
The running light system function can be set.
On
On / Off
Front body control module (FBCM)
Reset
Returns the setting content of the lighting system to the initial setting.
No
No / Yes
•  Front body control module (FBCM)
•  Rear body control module (RBCM)
•  Forward sensing camera (FSC)
•  Instrument cluster
•  Adaptive LED headlights control module
•  Adaptive front lighting system (AFS) control module