SHROUD SIDE MEMBER REMOVAL [PANEL REPLACEMENT]

id098008919000

Symbol Mark

ac5wzb00000017

Removal Procedure

1.  Drill the 3 locations indicated by (A) shown in the figure.

2.  Drill the 8 locations indicated by (B) and 2 locations indicated by (C) shown in the figure.

Note

•  When drilling the 3 locations indicated by (A) and 2 locations indicated by (C) shown in the figure, do not drill a hole all the way through or there could be a problem when installing the new part.

ac5wzb00000018

3.  Remove the shroud side member.