DTC B1041:54 [ADAPTIVE FRONT LIGHTING SYSTEM (AFS) CONTROL MODULE]


id1502b6025600

System malfunction location

Headlight auto leveling system initialization error

Detection condition
•  Ignition is switched ON (engine off or on) and headlight auto leveling system initialization is not performed.
Fail-safe
•  The swivel actuator is moved to the center.
•  The headlight leveling actuator is stopped at the position when the malfunction is determined.
Possible cause
•  Headlight auto leveling system initialization error
•  AFS control module malfunction
System wiring diagram

Diagnostic Procedure

Step

Inspection

Action

1
PERFORM HEADLIGHT AUTO LEVELING SYSTEM INITIALIZATION
•  Perform headlight auto leveling system initialization.
•  Clear the AFS control module DTCs using the M-MDS.
•  Perform the DTC inspection for the AFS control module using the M-MDS.
•  Is DTC B1041:54 displayed?
Yes
Perform the headlight auto leveling system initialization again, then go to the next step.
No
Go to Step 3.
2
VERIFY THAT REPAIRS HAVE BEEN COMPLETED
•  Clear the AFS control module DTCs using the M-MDS.
•  Perform the DTC inspection for the AFS control module using the M-MDS.
•  Is DTC B1041:54 displayed?
Yes
Replace the AFS control module, then go to the next step.
No
Go to the next step.
3
VERIFY IF OTHER DTCs DISPLAYED
•  Are any other DTCs displayed?
Yes
Repair the malfunctioning part according to the applicable DTC troubleshooting.
No
DTC troubleshooting completed.