PID/DATA MONITOR TABLE [BLIND SPOT MONITORING (BSM) CONTROL MODULE (Except Australian specs.)]
id1502b8021100
|
PID name |
Unit/Status |
Data contents |
Module control terminal |
|---|---|---|---|
|
Buzzer
|
Off/On
|
• Off: Blind spot monitoring (BSM) warning buzzer does not sound.
• On: Blind spot monitoring (BSM) warning buzzer sounds.
|
D,E (CAN)
|
|
INTNL_TMP_L
|
°C, °F
|
Displays Blind spot monitoring (BSM) control module (LH) internal temperature.
|
—
|
|
INTNL_TMP_R
|
°C, °F
|
Displays Blind spot monitoring (BSM) control module (RH) internal temperature.
|
G, J (CAN)
|
|
MAIN_SW
|
Off/On
|
• Off: Blind spot monitoring (BSM) switch not pressed
• On: Blind spot monitoring (BSM) switch pressed
|
D,E (CAN)
|
|
OP_BRT_L
|
—
|
Displays the Blind spot monitoring (BSM) warning light (LH) output brightness.
|
—
|
|
OP_BRT_R
|
—
|
Displays the Blind spot monitoring (BSM) warning light (RH) output brightness.
|
G, J (CAN)
|
|
SYSTEM_ST
|
Off/Passive_On/Active_On/Failure
|
• Off: Blind spot monitoring (BSM) system does not operate.
• Passive_On: Blind spot monitoring (BSM) system is on standby.
• Active_On: Blind spot monitoring (BSM) system operates.
• Failure: Blind spot monitoring (BSM) system malfunction.
|
—
|
|
TURN_SW_L
|
Off/On
|
• Off: Turn switch is in position other than LH.
• On: Turn switch is in LH position.
|
D, E (CAN)
|
|
TURN_SW_R
|
Off/On
|
• Off: Turn switch is in position other than RH.
• On: Turn switch is in RH position.
|
D, E (CAN)
|
|
VPWR_L
|
V
|
Displays Blind spot monitoring (BSM) control module (LH) power supply voltage.
|
I
|
|
VPWR_R
|
V
|
Displays Blind spot monitoring (BSM) control module (RH) power supply voltage.
|
G, J (CAN)
|
|
VSPD
|
KPH, MPH
|
Displays the vehicle speed.
|
D, E (CAN)
|
|
WRN_IND_L
|
Off/On
|
• On: Blind spot monitoring (BSM) warning indicator light (LH) turns off.
• Off: Blind spot monitoring (BSM) warning indicator light (LH) turns on.
|
G, J (CAN)
|
|
WRN_IND_R
|
Off/On
|
• On: Blind spot monitoring (BSM) warning indicator light (RH) turns off.
• Off: Blind spot monitoring (BSM) warning indicator light (RH) turns on.
|
G, J (CAN)
|
|
YAW_RATE
|
°/s
|
• —: Vehicle is stopped or while moving straight ahead.
• Exceeds 0°/s: Vehicle tilted left.
• Less than 0°/s: Vehicle tilted right.
|
D, E (CAN)
|