ENGINE OIL DATA RESET [WITHOUT CYLINDER DEACTIVATION (SKYACTIV-G 2.0, SKYACTIV-G 2.5)]

id0140m1444700

Note

•  If the engine oil was replaced with the engine oil maintenance monitor function ON, perform the engine oil data reset to reset the engine oil replacement period calculation data recorded in the PCM regardless of whether or not the wrench indicator light is illuminated.

•  The ON/OFF condition of the engine oil maintenance monitor function can be verified using the M-MDS. (See MAINTENANCE MONITOR OPERATION PROCEDURE [TYPE-A].)(See VEHICLE STATUS MONITOR SETTING [TYPE-B].)

•  The initialization (engine oil data resetting) of the recorded value can be performed using the instrument panel illumination knob in the instrument cluster as following.

1.  Switch the ignition OFF (LOCK).

2.  Switch the ignition ON (engine off) with the instrument panel illumination knob pressed and continue pressing the knob for about 5 s until the master warning light flashes.

3.  After the master warning light flashes for several seconds, the initialization is completed.