i-stop WARNING LIGHT (AMBER) [SKYACTIV-D 2.2]

id0140z7008700

Purpose, Function

• If the i-stop control inhibits the operation, the i-stop warning light (amber) flashes/illuminates to inform the driver that the i-stop control inhibits the operation.

Construction

• The i-stop warning light (amber) is built into the instrument cluster. (See INSTRUMENT CLUSTER.)

• For vehicles with center display, a warning message in the center display is displayed when the i-stop warning light (amber) is illuminated or flashes. For the message content and verification method, refer to the CENTER DISPLAY in the "workshop manual".

Operation

• The flashing/illumination conditions of the i-stop warning light (amber) are as follows:

i-stop warning light (amber) flashing condition

― Any of the following DTCs are stored:

PCM DTC

• For details on DTCs, refer to “Engine On-board Diagnostic System Malfunction Detection Function” in the “workshop manual”.

TCM DTC

• For details on DTCs, refer to “Transmission/Transaxle On-board Diagnostic System Malfunction Detection Function” in the “workshop manual”.

DSC HU/CM DTC

• For details on DTCs, refer to “Brake On-board Diagnostic System” in the “workshop manual”.

i-stop warning light (amber) illumination condition

― Any one of the following conditions is met:

• Ignition switched ON (check of i-stop control system)

• i-stop OFF switch is on

• Engine stalls due to driver's operation while engine is stopped by i-stop control^*

• Communication error between the instrument cluster and PCM

― Any of the following DTCs are stored:

PCM DTC

• For details on DTCs, refer to “Engine On-board Diagnostic System Malfunction Detection Function” in the “workshop manual”.

* :When an engine failure is carried out by a driver's operation, a message is displayed on a multi information display. Please refer to a "MULTI INFORMATION DISPLAY" for the contents of the message. (See MULTI-INFORMATION DISPLAY.)

• The PCM sends an i-stop warning light (amber) flashing/illumination request to the instrument cluster via CAN communication.