SUSPENSION TECHNICAL DATA

id025000800100

Front wheel alignment (Unloaded)*1

Item

Fuel gauge indication

Empty

1/4

1/2

3/4

Full
Maximum steering angle
[Tolerance ±3°]
Inner
37°54′
Outer
30°54′
Total toe-in
Tire
[Tolerance ±4 {0.2}]
(mm {in})
2.0 {0.08}
Rim inner
[Tolerance ±3 {0.1}]
Vehicle equipped with 17 inch wheel: 1.2 {0.047}
Vehicle equipped with 19 inch wheel: 1.3 {0.051}
(degree)
0°10′±0°20′
Caster angle*2 (Reference value)
[Tolerance ±1°]
SKYACTIV-G 2.0
SKYACTIV-G 2.5
SKYACTIV-G 2.5T
5°52′
5°54′
5°55′
5°56′
5°57′
SKYACTIV-D 2.2
5°51′
5°53′
5°54′
5°56′
5°57′
Camber angle*2 (Reference value)
[Tolerance ±1°]
-0°25′
-0°25′
-0°26′
-0°26′
-0°26′
Steering axis inclination (Reference value)
11°56′
11°57′
11°57′
11°58′
11°58′

*1  :Engine coolant and engine oil are at specified level. Spare tire, jack and tools are in designated position.
*2  :Difference between left and right must not exceed 1°30′.

Rear wheel alignment (Unloaded)*1

Item

Fuel gauge indication

Empty

1/4

1/2

3/4

Full
Total toe-in
Tire
[Tolerance ±4 {0.2}]
(mm {in})
2.0 {0.08}
Rim inner
[Tolerance ±3 {0.1}]
Vehicle equipped with 17 inch wheel: 1.2 {0.047}
Vehicle equipped with 19 inch wheel: 1.3 {0.051}
(degree)
0°10′±0°20′
Camber angle*2 (Reference value)
[Tolerance ±1°]
SKYACTIV-G 2.0
SKYACTIV-G 2.5
SKYACTIV-G 2.5T
-0°37′
-0°39′
-0°41′
-0°43′
-0°44′
SKYACTIV-D 2.2
-0°36′
-0°38′
-0°40′
-0°42′
-0°44′
Thrust angle (Reference value) [Tolerance ±0°48′]
-0°00′

*1  :Engine coolant and engine oil are at specified level. Spare tire, jack and tools are in designated position.
*2  :Difference between left and right must not exceed 1°30′.

Suspension

Item

Specification
Front lower arm ball joint stud starting torque
17 N·m {1.7 kgf·m, 12 ft·lbf} max.
Front lower arm ball joint stud rotational torque
3.2 N·m {33 kgf·cm, 28 in·lbf} max.
Front stabilizer control link ball joint starting torque
0.8—3.5 N·m {8.2—35 kgf·cm, 7.1—30 in·lbf}
Rear stabilizer control link ball joint starting torque
0.8—3.5 N·m {8.2—35 kgf·cm, 7.1—30 in·lbf}

Standard tire and wheel

Item

Specification
Wheel
Size
17 × 7J
19 × 7J
Material
Steel
Aluminum alloy
Inset
(mm {in})
50 {2.0}
45 {1.8}
Pitch circle diameter
(mm {in})
114.3 {4.50}
Tire
Size
225/65R17 102H
225/65R17 102V
225/55R19 99V
Air pressure
(kPa {bar <psi>})
Front
Up to 3 persons
230 {2.3, <33>}
250 {2.5, <36>}
Full load
260 {2.6, <38>}
Rear
Up to 3 persons
230 {2.3, <33>}*3
250 {2.5, <36>}*3
Full load
280 {2.8, <41>}*3
290 {2.9, <42>}*3
Remaining tread
(mm {in})
1.6 {0.063} min.
Wheel and tire
Wheel and tire runout
(mm {in})
Lateral direction
2.5 {0.098} max.
2.0 {0.079} max.
Radial direction
1.5 {0.059} max.
Wheel imbalance
Inside
(g {oz})
Knock-type*2:
8 {0.3} max.
Adhesive-type*1:
13 {0.46} max.
Adhesive-type*1:
12 {0.42} max.
Outside
(g {oz})
Knock-type*2:
8 {0.3} max.
Knock-type*2:
7 {0.2} max.
Lug nut tightening torque
(N·m {kgf·m, ft·lbf})
108—147 {12—14, 80—108}

*1  :Do not install four or more weights. Do not affix the weights such that they are parallel to each other or overlapping. One weight is 120 g {4.23 oz} or less and three weights are 160 g {5.64 oz} or less.
*2  :Do not install three or more weights. One weight is 60 g {2.1 oz} or less and two weights are 100 g {3.53 oz} or less.
*3  :When towing a trailer, make sure that the tire pressures of the rear tires are at least 20 kPa (0.2 bar, 2.9 psi) higher than the recommended tire pressures indicated on the tire pressure chart on the driver's door frame.

Temporary spare tire and wheel

Item

Specification
Wheel
Size
17 × 5 1/2J
Inset
(mm {in})
45 {1.8}
Pitch circle diameter
(mm {in})
114.3 {4.50}
Material
Steel
Tire
Size
185/80R17 99M
Air pressure
(kPa {bar <psi>})
320 {3.2, <46>}
Remaining tread
(mm {in})
1.6 {0.063} min.
Wheel and tire
Lug nut tightening torque
(N·m {kgf·m, ft·lbf})
108—147 {12—14, 80—108}