DRIVELINE/AXLE TECHNICAL DATA

id035000800100

Item		Specification
Front wheel bearing maximum play		0.05 mm {0.002 in}
Rear wheel bearing maximum play		0.05 mm {0.002 in}
Front drive shaft (tripod joint) full length (standard) (SKYACTIV-G 2.0)	MTX	LH: 675.5—685.5 mm {26.60—26.98 in} RH: 1039.8—1049.8 mm {40.938—41.330 in}
	ATX	LH: 672.5—682.5 mm {26.48—26.87 in} RH: 1036.6—1046.6 mm {40.812—41.204 in}
Front drive shaft (tripod joint) full length (standard) (SKYACTIV-G 2.5 (WITHOUT CYLINDER DEACTIVATION))	ATX	LH: 672.5—682.5 mm {26.48—26.87 in} RH: 1036.4—1046.4 mm {40.804—41.196 in}
Front drive shaft (tripod joint) full length (standard) (SKYACTIV-G 2.5 (WITH CYLINDER DEACTIVATION))	ATX	LH: 663.5—673.5 mm {26.13—26.51 in} RH: 1045.5—1055.5 mm {41.162—41.555 in}
Front drive shaft (tripod joint) full length (standard) (SKYACTIV-G 2.5T)	ATX	LH: 661.8—671.8 mm {26.06—26.44 in} RH: 1043.3—1053.3 mm {41.075—41.468 in}
Front drive shaft (tripod joint) full length (standard) (SKYACTIV-D 2.2)	MTX	LH: 661.9—671.9 mm {26.06—26.45 in} RH: 1043.0—1053.0 mm {41.064—41.456 in}
	ATX	LH: 661.8—671.8 mm {26.06—26.44 in} RH: 1043.3—1053.3 mm {41.075—41.468 in}
Rear drive shaft standard length		LH: 834.7—844.7 mm {32.87—33.25 in} RH: 873.2—883.2 mm {34.38—34.77 in}
Rear differential oil	Type	MAZDA LONG LIFE HYPOID GEAR OIL SG1
	Capacity (approx. quantity)	0.35 L {0.37 US qt, 0.31 Imp qt}
Rear differential backlash of pinion gear and side gear		0.1 mm {0.004 in} or less
Rear differential drive pinion preload		0.2—0.5 N·m {2.1—5.0 kgf·cm, 1.8—4.4 in·lbf}
Rear differential backlash of drive pinion and ring gear		Standard: 0.09—0.14 mm {0.004—0.005 in} Minimum: 0.05 mm {0.002 in} or more Variance: 0.07 mm {0.003 in} or less
Propeller shaft maximum runout		0.8 mm {0.031 in}
Propeller shaft rotation torque		0.3—1.4 N·m {3.1—14.0 kgf·cm, 2.7—12.0 in·lbf}
Transfer oil	Type	MAZDA LONG LIFE HYPOID GEAR OIL SG1
	Capacity (approx. quantity)	0.45 L {0.48 US qt, 0.40 Imp qt}*1 0.40 L {0.42 US qt, 0.35 Imp qt}*2