DTC C006B:00/C0072:68 [DSC HU/CM]

id040262884600

DTC
C006B:00, C0072:68
TCS/DSC control system
DETECTION CONDITION
•  C006B:00
―  DSC control continues for a specified period of time or more
•  C0072:68
―  Due to excessive braking, TCS control using braking is temporarily inhibited.
FAIL-SAFE FUNCTION
Refer to “DTC Table” and “Fail-safe function table”. (See DTC TABLE [DSC HU/CM].)
POSSIBLE CAUSE
•  This does not indicate a malfunction since constant TCS or DSC control over an extended period of time is inhibited to protect the DSC solenoid valve inside the DSC HU or the engine.
SYSTEM WIRING DIAGRAM
Not applicable

Diagnostic procedure

STEP

INSPECTION

ACTION
1
VERIFY THAT THE SAME DTC IS NOT PRESENT
•  Using the M-MDS, clear the DTC from the DSC HU/CM.
•  Retrieve the DSC HU/CM DTCs using the M-MDS.
•  Are the same DTCs present?
Yes
Replace the DSC HU/CM, then go to the next step.
(See DSC HU/CM REMOVAL/INSTALLATION [WITHOUT CYLINDER DEACTIVATION (SKYACTIV-G 2.0, SKYACTIV-G 2.5)].)
(See DSC HU/CM REMOVAL/INSTALLATION [WITH CYLINDER DEACTIVATION (SKYACTIV-G 2.0, SKYACTIV-G 2.5)].)
(See DSC HU/CM REMOVAL/INSTALLATION [SKYACTIV-G 2.5T].)
(See DSC HU/CM REMOVAL/INSTALLATION [SKYACTIV-D 2.2].)
No
Go to the next step.
2
VERIFY THAT NO OTHER DTCS ARE PRESENT
•  Are any other DTCs output?
Yes
Go to the applicable DTC inspection.
(See DTC TABLE [DSC HU/CM].)
No
DTC troubleshooting completed.