DTC U0423:00/U0443:00 [DSC HU/CM]
id040262905300
|
DTC
|
U0423:00/U0443:00
|
Abnormal message from instrument cluster
|
|
|
DETECTION CONDITION
|
• Correct data cannot be received from instrument cluster
|
||
|
FAIL-SAFE FUNCTION
|
Refer to “DTC Table” and “Fail-safe function table”. (See DTC TABLE [DSC HU/CM].)
|
||
|
POSSIBLE CAUSE
|
• Instrument cluster malfunction
|
||
|
SYSTEM WIRING DIAGRAM
|
Not applicable
|
||
Diagnostic procedure
|
STEP |
INSPECTION |
ACTION |
|
|---|---|---|---|
|
1
|
INSPECT FOR INSTRUMENT CLUSTER MALFUNCTION
• Switch the ignition off.
• Using the M-MDS, perform the DTC inspection for the instrument cluster.
• Are any DTCs detected?
|
Yes
|
Go to applicable DTC inspection.
|
|
No
|
Go to the next step.
|
||
|
2
|
VERIFY THAT THE SAME DTC IS NOT PRESENT
• Using the M-MDS, clear the DTC from the DSC HU/CM.
(See CLEARING DTC [DSC HU/CM].)
• Retrieve the DSC HU/CM DTCs using the M-MDS.
(See DTC INSPECTION [DSC HU/CM].)
• Are the same DTCs present?
|
Yes
|
Repeat the inspection from Step 1.
If the malfunction recurs, replace the instrument cluster, then go to the next step.
|
|
No
|
Go to the next step.
|
||
|
3
|
VERIFY THAT NO OTHER DTCS ARE PRESENT
• Are any other DTCs output?
|
Yes
|
Go to the applicable DTC inspection.
(See DTC TABLE [DSC HU/CM].)
|
|
No
|
DTC troubleshooting completed.
|
||