DTC INSPECTION [GATEWAY UNIT (GWU) (TYPE-B)]

id0902zc778400

Note
•  Refer to the [DTC INSPECTION] for the detailed DTC inspection. (See DTC INSPECTION.)

Snapshot Data

Note
•  The gateway unit (GWU) stores the following two types of snapshot data (vehicle information) when a DTC is detected and displays them in the M-MDS.
―  Vehicle information detected by gateway unit (GWU)
―  Vehicle information detected by instrument cluster and received by gateway unit (GWU) via CAN signal
•  The data for all DTCs currently detected is stored.

—: Not applicable

Snapshot data item

Unit

Data contents

Corresponding data monitor items
AMB_TEMP
°C, °F
Ambient temperature
—
APP
%
Accelerator pedal position status
—
BRK_SW
Not Stepping/Stepping
Brake pedal position status
—
ECT
°C, °F
Engine coolant temperature
—
ENG_RPM
Rpm
Engine speed status
—
GLOBAL_REAL_TIME
min
Accumulated total elapsed time since vehicle completion until 360°view monitor control module detects a DTC
—
IG_ON_TIMER
Min
Elapsed time since ignition was switched ON (engine off or on)
—
POWER_MODE
OFF/ACC/ON/CRANK
Ignition switch status
—
TOTAL_DIST
km, ft, mi
Accumulated total traveled distance from completion of vehicle until gateway unit (GWU) detects a DTC
—
VPWR_CBCM
V
Gateway unit (GWU) power supply voltage
—
VPWR_LIMP_HOME
V
Gateway unit (GWU) power supply voltage
—
VSS
Kph, Mph
Vehicle speed status
—