WIRELESS CHARGER (Qi) INSPECTION

id092100050200

Note

•  The integrity of the wireless charger (Qi) cannot be determined by a single unit inspection. When inspecting the wireless charger (Qi), perform the following procedure.

1.  Connect the M-MDS to the DLC-2.

2.  Perform the wireless charger (Qi) DTC inspection and verify if DTCs related to the wireless charger (Qi) are detected. (Refer to the [DTC INSPECTION [CONNECTIVITY MASTER UNIT]] in the workshop manual)

•  If DTCs are detected, repair the malfunctioning location according to the applicable DTC troubleshooting. (Refer to the [DTC TABLE [CONNECTIVITY MASTER UNIT]] in the workshop manual)