INSTRUMENTATION/DRIVER INFO. PERSONALIZATION

id092200018400

Type-A

Caution

• The personalization feature may not be set correctly if [Not Adopted.] is selected in the setting displayed on the Mazda Modular Diagnostic System (M-MDS). Do not select [Not Adopted.] in the setting displayed on the Mazda Modular Diagnostic System (M-MDS).

Note

• Settings of some personalization features displayed on the Mazda Modular Diagnostic System (M-MDS) cannot be changed depending on the vehicle specification.

• Settings of some personalization features cannot be switched depending on the vehicle specification.

• A personalization feature has been adopted which enables the instrument cluster settings to be changed.

• The setting for each function can be switched using the Mazda Modular Diagnostic System (M-MDS) or center display. Refer to the [INSTRUMENT CLUSTER PERSONALIZATION FEATURES SETTING PROCEDURE] in the workshop manual for the detailed setting procedure.

Turn and Hazard Indicator Alarm

Using Mazda Modular Diagnostic System (M-MDS)

Mazda Modular Diagnostic System (M-MDS) display	Function	Initial setting	Setting contents	Control unit
Turn Signal Volume.	The volume of the turn and hazard indicator alarm can be changed.	High	Low / High	Instrument cluster

Using center display

Display of center display	Function	Initial setting	Setting contents	Control unit
Turn Signal Volume	The volume of the turn and hazard indicator alarm can be changed.	High	High / Low	Rear body control module (RBCM)
Reset	Returns the setting content of the turn light system to the initial setting.	No	No / Yes	Rear body control module (RBCM)

Lights-on Reminder Warning Alarm

Using Mazda Modular Diagnostic System (M-MDS)

Mazda Modular Diagnostic System (M-MDS) display	Function	Initial setting	Setting contents	Control unit
Lights-on Reminder Volume.	The volume for the lights-on reminder warning alarm can be changed.	OFF / Low / High^*1	OFF / Low / High	Instrument cluster

Using center display

Display of center display	Function	Initial setting	Setting contents	Control unit
Light On Reminder Vol	The volume for the lights-on reminder warning alarm can be changed.	High^*1	High / Low / Off	Instrument cluster
Reset	Returns the setting content of the lighting system to the initial setting.	No	No / Yes	• Front body control module (FBCM) • Rear body control module (RBCM) • Forward sensing camera (FSC) • Instrument cluster • Adaptive LED headlights control module • Adaptive front lighting system (AFS) control module

*1 :The initial value differs depending on the market.

Temperature

Using center display

Display of center display	Function	Initial setting	Setting contents	Control unit
Temp^*1	The temperature unit can be changed.	°F or °C^*2	°F /°C	Instrument cluster

Using instrument cluster (without center display)

Instrument cluster LCD	Function	Initial setting	Setting contents	Control unit
°F or °C^*1	The temperature unit can be changed.	°F or °C^*2	°F / °C	Instrument cluster

*1 :When the ambient temperature display is switched, the set A/C cabin temperature display is also changed.

*2 :The initial value differs depending on the market.

Distance

Using center display

Display of center display	Function	Initial setting	Setting contents	Control unit
Distance	The distance unit can be changed.	mi or km^*1	mi / km	Instrument cluster

*1 :The initial value differs depending on the market.

Parking sensor system

Using center display

Display of center display	Function	Initial setting	Setting contents	Control unit
Parking sensor indication	The parking sensor information can be displayed on the center display.	Off	On / Off	Parking assist unit (ultrasonic)

Active driving display

Using center display

Display of center display	Function	Initial setting	Setting contents	Control unit
Active Driving Display	Setting can be changed so that the active driving display is not displayed.	On	On / Off	Instrument cluster
Height	The display height (up/down position) can be changed.	0	13 steps up/down from initial setting (total: 27steps)	Instrument cluster
Brightness Control	The method for adjusting the display brightness (automatically/manually) can be changed.	AUTO	AUTO / MAN	Instrument cluster
Calibration	The standard brightness with the automatic brightness adjustment can be changed.	0	2 steps up / down from initial setting (total: 5 steps)	Instrument cluster
Brightness	The standard brightness with the manual brightness adjustment can be changed.	0	20 steps up / down from initial setting (total: 41 steps)	Instrument cluster
Rotate	The tilt of the displayed image can be adjusted.	0	3 steps up / down from initial setting (total: 7 steps)	Instrument cluster
Navigation system guidance	The turn-by-turn (TBT) display can be switched on / off.	On	On / Off	Connectivity master unit (CMU)

Type-B

Note

• Refer to the [PERSONALIZATION FEATURES [(TYPE-B)]] in the workshop manual.