PID/DATA MONITOR TABLE [TELEMATICS COMMUNICATION UNIT (TYPE-B)]
id1602a7009800
|
PID |
Unit/Operation |
Data contents |
Module control terminal |
|---|---|---|---|
|
ALRM_NOTIFIC
|
OFF/ON
|
• OFF: Alarm notification setting is off.
• ON: Alarm notification setting is on.
|
—
|
|
CELLULAR_ACCOUNT
|
OFF/ON
|
• OFF: Usable phone number is not registered.
• ON: Usable phone number is registered.
|
—
|
|
DIGITAL_NETWORK_NUM
|
—
|
Displays telematics communication unit phone number
|
—
|
|
FOTA_PROGRESS
|
%
|
Reads out during FOTA execution, and displays rate of FOTA implementation progress.
|
—
|
|
GNSS_ALTITUDE
|
m
|
Displays sea level altitude received from GNSS
|
—
|
|
GNSS_GALILEO_NUM
|
—
|
Displays number of all Galileo satellites receiving position information
|
—
|
|
GNSS_GLONASS_NUM
|
—
|
Displays number of all GLONASS satellites receiving position information
|
—
|
|
GNSS_GPS_NUM
|
—
|
Displays number of all GPS satellites receiving position information
|
—
|
|
GNSS_HEADING
|
° (deg)
|
Displays vehicle angle received from GNSS (Based on magnetic north).
|
—
|
|
GNSS_LATITUDE
|
milliarcseconds
|
Displays altitude received from GNSS
|
—
|
|
GNSS_LONGITUDE
|
milliarcseconds
|
Displays longitude received from GNSS
|
—
|
|
GNSS_STAT
|
No fix/2D fix/3D fix/Antenna not properly connected
|
• No fix: Position information is not received from GNSS.
• 2D fix: 2D position information is received from GNSS.
• 3D fix: 3D position information is received from GNSS.
• Antenna not properly connected: An antenna is not connected appropriately
|
—
|
|
GNSS_UTC
|
sec
|
Displays coordinated universal time
|
—
|
|
GNSS_VELOCITY
|
km/h
|
Displays vehicle speed detected from GNSS
|
—
|
|
IG_STAT
|
OFF/ON
|
• OFF: IG1 power supply voltage is low.
• ON: IG1 power supply voltage is high.
|
1AE
|
|
IMEI
|
—
|
Displays telematics communication unit identification number
|
—
|
|
IMSI
|
—
|
Displays stored IMSI No.
|
—
|
|
LOCATION_INFO
|
OFF/ON
|
• OFF: Location information setting is off.
• ON: Location information setting is on.
|
—
|
|
MAINT_ASSIST
|
OFF/ON
|
• OFF: Vehicle health report setting is off.
• ON: Vehicle health report setting is on.
|
—
|
|
OPERAT_FORGOTTEN
|
OFF/ON
|
• OFF: Vehicle status alert setting is off.
• ON: Vehicle status alert setting is on.
|
—
|
|
OPERAT_MONITOR
|
OFF/ON
|
• OFF: Operation monitoring service is not usable.
• ON: Operation monitoring service is usable.
|
—
|
|
POWER_MODE
|
OFF/ACC/ON/CRANK
|
• OFF: Body control module (BCM) controls ignition switch off (lock).
• ACC: Body control module (BCM) controls ignition switch ACC.
• ON: Body control module (BCM) controls ignition switch ON (engine off).
• CRANK: Body control module (BCM) controls cranking at ignition switch ON.
|
—
|
|
RECALL_NOTIFIC
|
OFF/ON
|
• OFF: Recall notification setting is off.
• ON: Recall notification setting is on.
|
—
|
|
REMOTE_CHECK
|
OFF/ON
|
• OFF: Remote check setting is off.
• ON: Remote check setting is on.
|
—
|
|
REMOTE_CTRL
|
OFF/ON
|
• OFF: Remote control setting is off.
• ON: Remote control setting is on.
|
—
|
|
REMOTE_DIAG_RECORD
|
OFF/ON
|
• OFF: Malfunction notification setting is off.
• ON: Malfunction notification setting is on.
|
—
|
|
REMOTE_SERVICE
|
OFF/ON/None
|
• OFF: Remote service is not contracted.
• ON: Remote service is contracted.
• None: Contract of remote service is failed.
|
—
|
|
REMOTE_WRNG
|
OFF/ON
|
• OFF: Remote security alert setting is off.
• ON: Remote security alert setting is on.
|
—
|
|
RESULT_CALL_HIST
|
Complete/Fail/Intermit/Emergency Call/No Member Registration
|
Displays final results of call
|
—
|
|
SET_DATE
|
date
|
Displays set date for upload file used by connected service function
|
—
|
|
SET_HOUR
|
hour
|
Displays set GMT time for upload file used by connected service function
|
—
|
|
SET_MINUTE
|
minutes
|
Displays set GMT minutes for upload file used by connected service function
|
—
|
|
SET_MONTH
|
month
|
Displays set GMT month for upload file used by connected service function
|
—
|
|
SET_SECOND
|
seconds
|
Displays set GMT seconds for upload file used by connected service function
|
—
|
|
SET_YEAR
|
year
|
Displays set year for upload file used by connected service function as 2 digits (00) for year 2000
|
—
|
|
SIM_INFO
|
—
|
Displays specific number attached to SIM card
|
—
|
|
SOFT_NUM
|
—
|
Displays software version of NAD (communication module) in telematics communication unit
|
—
|
|
SUMMER_TIME
|
Off/On
|
• Off: Daylight savings time is not detected
• On: Daylight savings time is detected
|
—
|
|
TCU_FLAG
|
OFF/ON/Fail
|
• OFF: Telematics communication unit is not contracted.
• ON: Telematics communication unit is contracted.
• Fail: Contract of telematics communication unit is failed.
|
—
|
|
TEL_ANT_LVL
|
—
|
Displays reception signal level of TEL antenna (displays in 5 stages).
|
2A
|
|
TEL_NUM_FLAG
|
OFF/ON/Invalid/Fail
|
• OFF: Phone number is not written.
• ON: Phone number is written.
• Invalid: Phone number is written but invalid.
• fail: Failed to write the phone number.
|
—
|
|
TEL1_ANT_3LVL
|
—
|
Displays radio field strength of TEL antenna in 3 steps
|
—
|
|
TEL2_ANT_3LVL
|
—
|
Displays radio field strength of TEL antenna (sub) in 3 steps
|
—
|
|
TIME_DIF_RATE
|
Minus/Plus
|
• Minus: Local time delayed more than GMT time.
• Plus: Local time advanced more than GMT time.
|
—
|
|
TIME_DIF_VALUE
|
Hour
|
Displays time difference relative to GMT time
|
—
|
|
TIME_SOURCE
|
CMU/TCU
|
• CMU: Time specified by information from connectivity master unit (CMU)
• Time specified by telematics communication unitindependently (including when it is not specified)
|
—
|
|
TRIGGER_TYPE_HIST
|
Automatic/Manual/Test(Automatic)/Test(Manual)
|
• Automatic: Records call history automatically.
• Manual: Records call history manually.
• Test(Automatic): Records call history automatically (test).
• Test(Manual): Records call history manually (test).
|
—
|
|
VPWR
|
V
|
Displays voltage at telematics communication unit (power supply)
|
—
|