TESTER USAGE HISTORY

id990200000900

Note

•  The tester usage history is used for displaying the period or content of operations using the M-MDS relative to the vehicle connected to the current M-MDS or vehicle specified by the vehicle identification number.

Displaying Tester Usage History for Vehicle Connected to M-MDS

1.  Connect the M-MDS to the DLC-2.

2.  Switch the ignition ON (engine off or on).

3.  Perform the following procedure using the M-MDS.

(1)  Press [Start] for the vehicle identification.

(2)  Press the [Toolbox] tab.

(3)  Press the [Diagnosis] icon or the [Work Support] icon.

(4)  Press [Run] for Tester usage history.

4.  Verify the tester usage history according to the directions on the screen.

Displaying Tester Usage History after Specifying Vehicle Identification Number

1.  Select the "No Vehicle Mode" on the Mazda Diagnostic and Repair Software (MDARS) vehicle identification screen.

2.  Input the vehicle identification number.

3.  Verify the tester usage history according to the directions on the screen.