id098008743900

1.Rough cut area (A), drill the 57 locations indicated by (B), then remove the center pillar (outer).

acxaab00000046

2.Rough cut area (C), drill the 3 locations indicated by (D).

Caution

• Avoid cutting with a blow torch or similar tools as the insulator (shaded area) is flammable.

3.Drill the 3 locations indicated by (E) from the interior.

4.Remove the center pillar inner reinforcement.

acxaab00000047

5.Rough cut area (F), drill the 2 locations indicated by (G), then remove the center pillar (inner).

acxaab00000048