id098008744700

1.Rough cut area (A), drill the 78 locations indicated by (B).

2.Drill the 1 locations indicated by (C) from the interior.

3.Remove the front pillar (outer).

acxaab00000037

acxaab00000038

4.Rough cut area (D).

5.Drill the 2 locations indicated by (E) from the interior.

6.Remove the front pillar reinforcement.

acxaab00000039

7.Rough cut area (F), drill the 3 locations indicated by (G), and then remove the front pillar (inner).

8.Remove the spot weld sealer using a disc grinder.

acxaab00000040