 |
belbze00000176
id011000505500
1.Disassemble in the order indicated in the table.
belbze00000176
|
|
1
|
Dipstick (If equipped)
|
|
2
|
Spark plug
|
|
3
|
Cylinder head cover
|
|
4
|
Crankshaft pulley lock bolt
|
|
5
|
Crankshaft pulley
|
|
6
|
Water pump pulley
|
|
7
|
Drive belt idler pulley (If equipped)
|
|
8
|
Engine front cover
|
|
9
|
Front oil seal
|
|
10
|
Chain tensioner
|
|
11
|
Tensioner arm
|
|
12
|
Chain guide
|
|
13
|
Timing chain
|
|
14
|
Seal (If equipped)
|
|
15
|
Oil pump chain tensioner
|
|
16
|
Oil pump chain guide (If equipped)
|
|
17
|
Oil pump sprocket
|
|
18
|
Oil pump chain
|
|
19
|
Crankshaft sprocket
|
Crankshaft Pulley Lock Bolt Disassembly Note
1.Install the SST to the ring gear to lock the crankshaft against rotation.
belbze00000034
|
Front Oil Seal Disassembly Note
1.Remove the oil seal using a flat head screwdriver.
belbze00000035
|
Chain Tensioner Disassembly Note
1.Hold the chain tensioner ratchet lock mechanism away from the ratchet stem with a thin screwdriver.
2.Slowly press the tensioner piston.
3.Hold the chain tensioner piston with a 1.5 mm {0.06 in}wire or paper clip.
belbze00000036
|
Oil Pump Sprocket Disassembly Note
1.Temporarily install the crankshaft pulley and crankshaft pulley lock bolt to the crankshaft, and lock the oil pump against rotation as shown in figure.
belbze00000037
|
2.Remove the oil pump sprocket, and then remove the crankshaft pulley and crankshaft pulley lock bolt.
