id011000506200

1.Measure the valve head margin thickness of each valve.

belhue00000026

• If it is less than the specification, replace the valve.

Valve head margin thickness (Minimum)

IN: 1.62 mm {0.0637 in}

EX: 1.82 mm {0.0716 in}

2.Measure the length of each valve. Replace the valve if necessary.

belhue00000027

• If it is less than the specification, replace the valve.

Valve length (Standard)

IN: 102.99—103.79 mm {4.055—4.086 in}

EX: 104.25—105.05 mm {4.105—4.135 in}

Valve length (Minimum)

IN: 102.99 mm {4.055 in}

EX: 104.25 mm {4.104 in}

3.Measure the stem diameter of each valve in X and Y directions at the three points (A, B, and C) as indicated in the figure.

belhue00000028

• If it exceeds the specification, replace the valve.

Valve stem diameter (Standard)

IN: 5.470—5.485 mm {0.2154—0.2159 in}

EX: 5.465—5.480 mm {0.2152—0.2157 in}

Valve stem diameter (Minimum)

IN: 5.440 mm {0.2142 in}

EX: 5.435 mm {0.2140 in}

4.Measure the inner diameter of each valve guide in X and Y directions at the three points (A, B, and C) as indicated in the figure.

belhue00000029

• If not as specified, replace the valve guide.

Valve guide inner diameter (Standard)

5.509—5.539 mm {0.2169—0.2180 in}

5.Calculate the valve stem to guide clearance by subtracting the outer diameter of the valve stem from the inner diameter of the corresponding valve guide.

belhue00000030

• If it exceeds the specification, replace the valve and/or the valve guide.

Valve stem to guide clearance (Standard)

IN: 0.024—0.069 mm {0.0009—0.0027 in}

EX: 0.029—0.074 mm {0.0012—0.0029 in}

Valve stem to guide clearance (Maximum)

0.10 mm {0.004 in}

6.Measure the protrusion height (dimension A) of each valve guide without lower valve spring seat.

belhue00000031

• If not within the specified, replace the valve guide.

Valve guide protrusion height (standard)

12.2—12.8 mm {0.481—0.503 in}