id011000500600

Caution

• Parts for engines manufactured in Mexico and Hiroshima cannot be used interchangeably as the engine will not operate correctly resulting in a serious malfunction. To prevent this, when replacing parts refer to the 'SPECIFICATION IDENTIFICATION' table below and verify the engine's place of manufacture before performing the servicing. (See SPECIFICATION IDENTIFICATION)

1.Disassemble in the order indicated in the table.

beleue00000091

Drive Plate (ATX), Flywheel (MTX) Disassembly Note

1.Hold the crankshaft using the SST.

2.Remove the bolts in several passes.

beleue00000023