id011000507200

1.Measure the distortion of the cylinder block top surface in six directions as indicated in the figure.

belbze00000102

• If it exceeds the maximum, replace the cylinder block.

Maximum distortion, head gasket side

0.10 mm {0.0039 in}

2.Measure the cylinder bores in X and Y directions at 42 mm {1.65 in} below the top surface.

belbze00000103

• If not within the specification, replace the cylinder block.

Maximum bore inner diameter

89.000—89.030 mm {3.5040—3.5051 in}