SECONDARY SHAFT (NO.2) COMPONENTS PREINSPECTIONSM2023756
SECONDARY SHAFT (NO.2) COMPONENTS PREINSPECTION

D6E051517040108
E6U515ZMC147

Thrust Clearance Inspection

1.Measure the thrust clearance of each gear using a feeler gauge and a dial gauge.

Secondary shaft (NO.2) gear thrust clearance
(mm {IN.EN_UK})

Gear

Thrust clearance

5th
0.10-0.55 {0.0039-0.0216}
6th
0.10-0.55 {0.0039-0.0216}
Reverse
0.11-0.34 {0.0043-0.0133}

• If not within the specification, replace the malfunctioning parts.

Radial Clearance Inspection

1.Measure the radial clearance of each gear using a dial gauge.

Secondary shaft (NO.2) gear radial clearance
(mm {IN.EN_UK})

Gear

Radial clearance

5th
0.015-0.066 {0.00590-0.00259}
6th
0.015-0.066 {0.00590-0.00259}
Reverse
0.015-0.068 {0.00590-0.00267}

• If not within the specification, replace the malfunctioning parts.