DIFFERENTIAL ASSEMBLYSM2023763
DIFFERENTIAL ASSEMBLY

D6E051527100103

Caution
• Do not place the bearing (ring gear side) facing downward on a workbench after assembling the differential component. It may cause damage to the bearing roller guide.

1.Assemble in the order shown in the figure.
DPE515BM1010

1
Gear case component
2
Ring gear
(See Ring Gear Assembly Note.)
3
Bearing (ring gear-opposite side)
(See Bearing (Ring Gear-Opposite Side) Assembly Note (Except L3 Turbo).)
(See Bearing (Ring Gear-Opposite Side) Assembly Note (L3 Turbo).)
4
Bearing (ring gear side)
(See Bearing (Ring Gear Side) Assembly Note.)


Ring Gear Assembly Note

1.Assemble the gear case component and ring gear, and tighten the bolts in a criss-cross pattern in a few passes.
E6U515ZMC1052
Tightening torque
99.7-112.3 N·m
{10.2-11.4 kgf·m, 73.6-82.8 ft·lbf}

Bearing (Ring Gear-Opposite Side) Assembly Note (Except L3 Turbo)

1.Install a new bearing using the SSTs and press.
DPE515BM10113

Bearing (Ring Gear-Opposite Side) Assembly Note (L3 Turbo)

1.Install a new bearing using the SSTs and press.
E6U515ZMC1074

Bearing (Ring Gear Side) Assembly Note

1.Install a new bearing using the SSTs and press.
E6U515ZMC1065